Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by impet14

  1. I

    IAR ARM simulator for logic analyzer

    Hi,all Does IAR ARM software simulator in the debugger mode have logic analyzer for each port? and How can we do? thanks
  2. I

    Flash Cortex-M4 miccontroller

    Can we flash STM32F4 via serial?
  3. I

    Flash Cortex-M4 miccontroller

    Can we flash program via serial port to Cortex-M4 microcontroller? what else Cortex-M4 microcontroller can be flashed via seirial port? thanks
  4. I

    [SOLVED] Which manufacture is the best for accelerometer ic?

    Which manufacture is the best for accelerometer ic? may be low noise.
  5. I

    Please suggest software debugger for dspic30f

    I'm using MPLAB C30 and MPLAB SIM. I've tried to debug with uart interrupt.MPLAB SIM can print out but can not receive the input key when I test receiving interrupt code from uart. thnks.
  6. I

    Please suggest software debugger for dspic30f

    Please suggest software debugger for dspic30f. Thank you
  7. I

    repair nand from badblocks?

    how to repair or fix jffs2 rfs in nand flash from badblocks error ? Thanks in advance.
  8. I

    Problem with setting Kernel for RTC with SAM9260

    Re: Please help with RTC I set the kernel configuration as # CONFIG_RTC_LIB=y CONFIG_RTC_CLASS=y CONFIG_RTC_HCTOSYS=y CONFIG_RTC_HCTOSYS_DEVICE="rtc0" CONFIG_RTC_DEBUG=y # # RTC interfaces # CONFIG_RTC_INTF_SYSFS=y CONFIG_RTC_INTF_PROC=y CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_INTF_DEV_UIE_EMUL is...
  9. I

    Problem with setting Kernel for RTC with SAM9260

    Re: Please help with RTC I've enabled RTC
  10. I

    Problem with setting Kernel for RTC with SAM9260

    Re: Please help with RTC yes,linux kernel.
  11. I

    Problem with setting Kernel for RTC with SAM9260

    Re: Please help with RTC for internal RTC ,how to set kernel?
  12. I

    Problem with setting Kernel for RTC with SAM9260

    Any can help me to use RTC with SAM9260? Thanks in advance.
  13. I

    How to show app on the TFT via debug ports?

    how we command via debug ports to show app on the TFT (mini2440).
  14. I

    Can i run the file system from the nand flash? (friendlyarm mini2440)

    Re: asking abt RAM yes. I want to use root file system from nand flash. if I have ram of 64 MB and I want to download rootfile system of 100 MB into nand flash. How can I do it?
  15. I

    Can i run the file system from the nand flash? (friendlyarm mini2440)

    Hi all, I have one question about friendlyarm mini2440.Can we download rootfile systems of more than RAM sizes into nand flash? and How? thnks in advance.
See more

Part and Inventory Search

Back
Top