Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
HXP circuit is a manufacturer in China.
We offer fellowing board,
1.Matel core/based PCB(Alu PCB and Cu substrate PCB)
2.Hybrid multilayer board(Rogers+FR-4)
3.Heavy copper PCB(Up to 6oz)
4.Flex-rigid, Rigid, Flex board
5.High Frequency Board(Rogers,Arlon,PTFE)
If any...
Rigid-Flex PCB
3 layer
26.1*16.94 mm
0.4 mm rigid /0.1mm flex
Polyimide + FR4 material
2.5/0.5/2.5 oz copper
Hard gold plating 5u"
Polyimide cover layer
on bottom only
No silkscreen
Contact me sales01@hxpcircuits.com
single layer copper based PCB
Material: copper base.
40mm*60mm 1.2mm
Copper: 2oz
Green solder mask, white legend.
If you have the copper base proect, please contact me sales01@hxpcircuit.com
Here are some boards we bulit.
PCB with hard gold fingers
8 layer
318.9*146.86 mm
2pcs/array
1.6 mm thick
FR-4
1 oz copper all layers
ENIG + Hard gold fingers
Green soldermask
Yellow silkscreen
Countersink holes
Single sided flex PCB
1 layer
95*50 mm
0.15 mm thick
PI material
1/1 oz copper...
Here are some PCB we made.
Hybrid Multilayer PCB
3 layer
107.6*120.44 mm
6pcs/array
1.65 mm thick
FR4+RO4350B 10mil
1/0.5/1 oz copper
ENIG
Green soldermask top only
White silkscreen top only
Long PCB
2 layer
508*114.3 mm
1.6 mm thick
FR4
2/2 oz copper
ENIG
Black soldermask
White silkscreen...
HXP circuit is a PCB manufacturer.
Here are some boards we made recently.
More info, please contact me sales01@hxpcircuit.com
Or visit our website www.hxpcircuit.com
HXP circuit is a experienced ISO&UL licensed PCB factory.
We can do rigid, flex, rigid-flex board boards.
We can asl do some of special boards, like aluminium boards and CU substrate boards.
We have rogers material in stock.
Our website www.hxpcircuit.com.
Contact me via sales01@hxpcircuit.com
HXP is a UL&ISO licensed PCB manufacturer in China
We have rich experience in FR-4 boards, Roger material boards , flex boards and metal boards( Aluminium and copper based boards)
MOQ: 1 pieces.
our website www.hxpcircuit.com
Any questions, contact me sales01@hxpcircuit.com
HXP circuit, a chinese ISO&UL licensed PCB manufacturer, can make rigid, flex, rigid-flex, metal boards(ALU and Cu substrate board)
We also have rogers material, can do back drilling and gold finger.
Prototype and mass production is ok.
Our website is www.hxpcircuit.com
If any questions...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
