Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
thanks for your reply
i did the first step
by using this at commands below
at
OK
AT+CGDCONT=1,IP,MMS,0.0.0.0,0,0 *Context parameter setting*
OK
AT+CGQMIN=1,0,4,0,1,31 *Minimum Quality of the Service Requested*
OK
AT+CGQREQ=1,0,4,0,1,31 *Requested Quality of the Service*
OK
ATD*99***1# *GPRS...
ok friends,thanks for reply
iam talking about a connection over GPRS "GPRS data connections " by using a GSM network"Mobile operator in my country " ,i do not need establish data call on GSM
how i can use GPRS modem to send data to other GPRS modem ??
i have all configruation APN,IP for each...
thanks mr.FvM
how i can establish this connection basic" PPP over GPRS"??
see the AT commands of my GSM/GPRS modem and tell from where i should start ????plz
i need point to point connection between those modems
some one told me u can't do this
i think now to define the receiver unit as server .
iam using this connection "gprs connection", but i have alot of problem
i have PIC18F4550 microcontroller connected to GSM/GPRS modem "telit GE865-quad " it's the transmitter unit , used for send at command and data
also i have mobile phone connected to pc "reciever unit " , used for receive...
ok, i have 2 sim data card , one of them are dynamic IP,and the other are static IP
also i have a GSM/GPRS modem telit GE865-quad and it's AT command files in the links below
https://www.telit.com/module/infopool/download.php?id=542
for GPRS commands...
hello ;
how i can connect 2 GSM/GPRS modem to send data over GPRS
i have the AT command of my GSM/GPRS
what the code for establish this connection between the modem ??
thanx
hi friends
I'm doing a graduation project , and the idea of the project is to send ECG signal "heart signal" from home to emergancy office ,The idea take the signal from the device of the ECG to the pic micro controller ,then send it to GSM modem, then GSM modem send the data to other GSM...
hi friends
I'm doing a project graduation, and the idea of the project is to send a signal heart to emergancy office "signal of ECG," The idea is that we take the signal from the device of the ECG to the micro controller ,then to the RS-323 , then to the Nokia device which have...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.