Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by harveyradar

  1. H

    GOS-3310, NRI 2500, or S3000A 10Mhz oscilloscope; Technical question

    Re: GOS-3310 , NRI 2500 , or S3000A 10Mhz oscilloscope Technical question The schematic is available at https://www.eserviceinfo.com/download.php?downloadstart=1&fileid=36288 best of luck trying to find a Cal instruction - I not sure one was ever done! cheers Harv
  2. H

    Kenwood CS-2150 Oscilloscope schematics or service manual

    I think you will find it at http://jvgavila.com/man_test/CS2150/CS2150_SM_KENWOOD.pdf
  3. H

    service manual cro 10Mhz china make

    I have fixed a couple of these. I use this schematic: https://www.eevblog.com/forum/testgear/any-experience-with-atten-at7016-1-channel-10mhz-oscilloscope/?action=dlattach;attach=91652 Most times the 2200uF/25V caps have failed Occasionally a fuse - unsure why Once it has been the SMPS...
  4. H

    GOS-955 oscilloscope manual wanted

    Can anyone please help me with a scan of the GW (Good Will) GOS-955 oscilloscope manual. I am restoring one at the moment - they are a classic - I believe one of the first produced by GW. thanks in appreciation Harvey
  5. H

    Please help me find service manual of Oscilloscope type EZ OS5020

    try https://www.testequipmentdepot.com/ezdigital/pdf/os5020-5020c_manu.pdf Harvey - - - Updated - - - sorry I was fooled by the front page... It is just the same users manual harvey
  6. H

    Hakko 474 Desoldering Station

    Re:opinion on the spring filter system, on the Aoyue this needed to be cleaned every 20 or so holes due to the hole in the spring clogging up. With the Hakko, does the solder actually stick to the inside of the spring like it's supposed to instead of blocking up the hole? Ive not used the...
  7. H

    Hakko 474 Desoldering Station

    What a coincidence - I just dragged out my Hakko 474 this afternoon to do a big desoldering job. It hadn't been switched on for about 3 years - it was a throwout from my old work - deemed to be beyond it's 'use by date' and it worked like a dream. So keep hunting - on the basis of today's...

Part and Inventory Search

Back
Top