Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Here,
I am testing the sim900 at commands in Hyper terminal.Its works properly wants to implement my program.
I am able to ready the sms by using at+cmgr=sms number
eg:at+cmgr=8 which upon displays sms details. If i want to see the sms that has sent immediately,before even typing the command...
Hi,
I have a task to interface DMM through serial port.I got the device software also.I am able to connect the serial port to pc and checked the reading in the software(device).In addition to that for interfacing the have given commands in manual.Now I tired a lot of times to communicate the...
hi,
I would like to interface the PCI card through PC. I have downloaded PCI-7396 (96 DIO) user guide from internet.In that , they have mentioned C/C++ libraries to for interface.I planning to interface the PCI-7396 through PC and want to implement in C#.
can u suggest me any idea to do...
hi,
I just want to enter the timer duartion of three solenoids in three text boxes and click the button called invert operation.The resultant suppose to be enable the corresponding LED in board till the first text box time duration and then it has to consider second timer duration then have to...
I could find the solution to this unhandled exception..because the inpout32.dll file was corrupted.So was able to get such unhandled exception..I asked ur help or ur advise because am novice in parallel port usage and other things...
hi,
here in this below simple program am trying to compile and which giving an unhandled exception.want to know whether the _outp(),_inp() functions will work for windowsxp operating system.If so,then why am getting the unhandled exception.I would like to check the low and high on the...
Hi,
I got the document of programming or interfacing the parallel port in VB .In that they had maentioned the BOIS and DOS interrupts and its usage.I want to know whether these BOIS and MS-DOS interrupts are used because they want to do the communication with printer.Here am interfacing one...
I would like to know the books or complete tutorial for programming parallel port in C. the compiler am using is visual studio 2008 VC++..Does the syntax of C is same as in C++ also.I want to make GUI first and then parallel port operation in VC++ compiler.I have tired before implementing the...
I want to communicate the PCB through parallel port of PC.i have read about all the 25 pins and how does the data transmitted to printer by considering the pins. here understood that its has three registers.
data register,control register and status register. I want to know these registers will...
Thats really helpful for me.I checked the cable by shorting the RxD and TxD pins at one side by connecting to PC.I could see the Prompt in hyperterminal .
I shorted all the pin combinations whcih was given in the user manual of LCR.Then i found 7 & 8 combination,6+1 & 4 combination not shorted...
Hey foxyrick, Thanks for the reply
I'm using the RS232 null-modem cable.still i could not get any response from the LCR meter.
Any suggestion to communicate with LCR meter through RS232 null modem cable.
Hi,
I would like to communication the LCR meter through hyperterminal. I had set the baud rate as per the LCR -meter but still i Could not communicate.
Communication PDF was downloaded from the LCR -800 series website.
The command i typed in hyperterminal was COMU?<^END^M> then enter
If the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
