Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by elan_arr

  1. E

    connecting to bluelink bluetooth module through hyperlink

    I purchased a Bluelink bluetooth module from rhydolabz, a couple of weeks ago. The purpose of my project is to detect bluetooth devices (mobile phones, handsfree) using the bluelink module and store the MAC addresses of the detected devices in a memory card. I'm using an ATMEGA8 for...
  2. E

    Bluetooth Data Acquisition Project HELP!

    yeah that is fine...but in my project the objective is to acquire and store the MAC id's in a memory device say a micro SD or something...and later say after two hours or so, visit the place take the card to retrieve id's later in the lab.... Thanks for your reply by the way...:)
  3. E

    Bluetooth Data Acquisition Project HELP!

    Hi, I have this situation. I have to design a bluetooth based data acquisition system. This device should detect other bluetooth devices in its range and store the MAC ID of the detected devices and the time of detection. It'll be helpful if someone gives me an idea how to work about with this...
  4. E

    Half wave rectifier output

    yeah....clear....thanks a lot....hope i gain a lot of knowledge from you and this forum....thank you very mush....:D
  5. E

    Half wave rectifier output

    yeah its clear...thanks a lot....so the value i measure as the output is less than the peak input voltage....so there is nothing absurd in it.....am i right???
  6. E

    Half wave rectifier output

    Can you please be a bit more clear....i cant understand it...if the capacitor is charged upto the peak value,how is the output exceeding the input???,why cant a DMM be trusted for measuring....please explain...please
  7. E

    Half wave rectifier output

    In the half wave rectifier circuit with a capacitor filter i'm getting an output of 26 volts DC for 24 volts AC input.....i want to know how this is possible....output is more than the input....i used 1n4007 PN junction diode,1K resistor and 100uF cap....Please clarify my doubt...
See more

Part and Inventory Search

Back
Top