Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by eidtech

  1. E

    how to read data from rfid tag

    rfid project security system TI
  2. E

    RS232C or RS485 for a thousand feet long network

    Re: Question on RS232C RS485
  3. E

    Funny Electronics Images

    funny electronics :D **broken link removed**
  4. E

    what is the best compiler for dspic

    matlab dspic IAR Embedded Workbench for dsPIC
  5. E

    Is it possible to read PIC16F876

    www.mcuservice.com
  6. E

    Problem with displaying values on LCD using DS1307

    ds1307 problem Check your connections, If you are not using a Backup Battery, connect Pin 3 to GND. Check your 32Khz Oscillator.
  7. E

    How to implement a delay on power on push button?

    I want to know how can i implement a delay on power on push button. So i want to power a device after push button has been pressed for 3 or more seconds. It is like power button on cell phones and other electronics devices. Thank you very much
  8. E

    How to change pads/drill size in Eagle without dying?!

    drill-aid.ulp Alunaro.. This is very easy... First you need to know what package has the component you want to modify. Goto control panel, open library in which component is placed. You have a blank window, next to printer icon, you have 3 icons... Device, Package and Symbol... select...
  9. E

    Using BootLoader on AVR Mega128

    avrmega128 Try MegaLoader... it works on M128.
  10. E

    Address Map for 4x16 LCD

    4x16 lcd I have a problem with one LCD 4 x 16 Module (from JHD...lcd-china.com). This code... lcd_gotoxy(0,0); lcd_putsf("0000000000000000"); lcd_gotoxy(0,1); lcd_putsf("1111111111111111"); lcd_gotoxy(0,2); lcd_putsf("2222222222222222"); lcd_gotoxy(0,3)...
  11. E

    Custom Board Vs Developer Boards

    Developer Boards for Prototyping and Development. Custom Boards for End Application.
  12. E

    WHAT PCB LAYOUT PROG USE BIG COMPANIES LIKE SONY,PHILIPS...

    layout of sony company There are a lot of options.. since electronic design is not only at one design center. Every company has a lot of design centers.
  13. E

    should I use a decoupling capacitor with DS1232LP and DS1307

    should I use a decoupling capacitor with DS1232LP and DS1307? This is my first design with DS1232LP and DS1307... no information about decoupling capacitor is on respective datasheets. Thank you very much.
  14. E

    Saving variable content to EEPROM before power is cut-off

    Re: Saving variable content to EEPROM before power is cut-of Don't forget to turn off all devices that are no necessary to write to EEPROM when power fail is detected (by an interrupt can be), by example LEDs, LCD, External Devices, etc.
  15. E

    Copy and Paste in EAGLE...

    Hi. I need some help in Eagle PCB Software. I have two board files... first one with my components, routes, all is ok. second one with layout of board, holes, size, and all needed requirements to be attached to an plastic enclosure. so, my question is, how can I copy my board layout to...
See more

Part and Inventory Search

Back
Top