Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
Hello, I would like to know if there is any way to convert a 24 bits lcd TFT signal to a 4 bits lcd STN signal. Could I use 4 bits of 8bits of the red signal and the others signals set to ground?. Is there any chip for this purpose?
Thanks a lots
Best Regards
Hello, I have installed Mentor Expedition 2005 for linux and Modelsim is missing. Is Modelsim included with Mentor Expedition? or is sold separately.
Thanks a lot
/tools/dfii/bin/icfb: 17: cds_root: not found
I got this problem bin/tar: -b1: Not found in archive . I copied the program tar of a older dist (redhat 8) tu ubuntu. But after that I got another problem with libc so I mounted the chroot sarge(), after that all works fine.
Best Regards
Re: SWAP
Hi, ok fisrt you must have space without any partition, if you don`t have you should resize a partition to get free space. After use fdisk or your prefer program to create a partition with type linux swap (82). After that format the new swap partition with the command mkswap /dev/"you...
Hi all, in sarge all the soft with old libc (kylix, cadence..) works fine but if you use new ubuntu Hoary or dapper, you get lots problems with libc and kernel, and if you use ubuntu in 64bits more problems. The solution is make a chroot with sarge. So you can use a powerful 64bits machine with...
Should be possible, try mount -t iso9660 /dev/cdrom /mnt/cdrom(in case of your mount point is in /mnt/cdrom)
If there isn't /dev/cdrom use:
/dev/hda if IDE Primary Master or
/dev/hdb if IDE Primary Slave or
/dev/hdc if IDE Secundary Master or
/dev/hdd if IDE Secundary Slave
P-CAD 2002 WORKS FINE IN LINUX WITH WINE, HERE IS THE STEPS:
P-CAD 2002
URL: http://www.pcad.com
Tested Wine Version: 20021007
First you must install DCOM98. This is needed to make the installation program work.Get it at: **broken link removed**
Installation is easy. Just type wine...
I don't like the RedHat vmlinuz default, I always recompile the kernel, with my favorite option, and with my hardware, so you kernel is cool for your machine. Sometime the default kernel not work cool with all the machines, try to compile your own kernel, you also can check if asus has any...
The CD images are good? You can check it with MD5 Sums. Since any difference between two files results in two different strings, MD5's can be used to determine that the file or iso you downloaded is a bit-for-bit copy of the remote file or iso.
Intel Redhat 7.2 i386 disc1 or enigma-i386-disc1...
How many partitions there is?
Usually should be 3 and should be mounted so:
You need to specify the mount point for the partitions in the installation:
/dev/hda1 /boot Type Linux Native
/dev/hda2 / Type Linux Native
And Swap Type Linux Swap
This problem can be because the...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.