Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by curganer

  1. C

    looking for a fieldbus monitor

    Hi all, i am looking for a fieldbus monitor to observe the P/R/O/F/I/B/U/S. It does no matter, what pc-card is needed. I only want to take a look on the softwares. All information are welcome. Thanks in advance Curgan :smile:
  2. C

    Field/bus monitor (double posting)

    Sorry for double posting!! Curgan :roll: <font size=-1>[ This Message was edited by: curganer on 2002-01-08 11:04 ]</font>
  3. C

    PCMCIA interface for PC/104 signal, dhe same as ISA-bus?

    hi all, i need your help. I design a PCMCIA interface for PC/104 signal. Everybody know that the PC/104 signals are nearby the same as the signals of the ISA-bus. Now i have to develop a board which can convert the ISA-bus signals to a PCMCIA protocol. A standard to do this is taking the Vadem...
  4. C

    VADEM VG-469 based PCMCIA card adapter

    vadem vg-469 Hi all, i ve to design a PCMCIA card adapter for ISA bus interface. I know there is a chip like VADEM VG-469 for controlling the signals. Has anyone a schematic or an application or experience with this chip, so i can win time for development. Thanks a lot and bye Curgan
  5. C

    asynchronous 24 bits bus + data strobe

    Hi proton, do not use the AMCC Chip, because the performance is not on a high level. Please inform you about the PLX 9054 for master or PLX 9052 for slave applications. If you have any questions, post it !!! Bye Curgan
  6. C

    I search a "IC search engine" :-)

    hi, try chip*center.c*om. bye curgan
  7. C

    Bypass Capacitors Choosing

    dimensioning bypass capacitors Hi folks, could anyone tell me how i should dimension my bypass and couple capacitors?? Is there any good stuff in the net, where I can read about it?? Thx Curgan
  8. C

    ARM Processor - request for resources

    bootloader arm processor hi, thx for your answer. i am very interesting in i*n*t*e*l Strong*ARM and the A*R*M-C-o-r-e of A@l?t*e@r?a. Try to find, which has the best performance. thx curgan
  9. C

    ARM Processor - request for resources

    macrigor debugger in linux hi all, has anyone experience with the arm processor. I could need datasheets and all documents you know. Gracias curgan
  10. C

    Constructing PCI card - request for resources

    sorry, i forget to say, that amcc is sinking down and can't concurrent with the plx chips. I know it. by
  11. C

    Constructing PCI card - request for resources

    hi, i ve buildt a pci- card with PLX 9050,too. If you want develop a master card you must take the PLX 9054 or the 9080. The V3 cubed are a new and powerful family, too. if you want more info. post it !!! Bye curgan
  12. C

    8051 series development tool

    hi, if you need a lot of i/o-ports try the dallas ds87c550. The software problem will be solved with K*eil. Download the evaluation software ! Good luck curgan :smile:
See more

Part and Inventory Search

Back
Top