Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by bayramonur

  1. B

    12 volt DC to 5 volt DC regulated

    Can you post the values of all equiments in the reglated circuit? And all transistor alternatives? What maximum current value is?
  2. B

    Unknown PIC Programmer AMEK-S2!!!

    I konow one serail programmer and its Melabs serial programmer.But i see Winpic800 programmers settins some serial programmers configrations. https://www.picbasic.com/downloads/meProg330Beta_setup.exe **broken link removed**
  3. B

    Unknown PIC Programmer AMEK-S2!!!

    Some of programmer's have 74LS05-6 or 74LS07 buffer chip.If you have 74LS05-6 the data and clocks inverted or have 74LS07 the data and clock only buffered.And you have to know what pins are use LPT port.I suggest picalw software. When you install it you setup it from SETTINGS\HARDWARE SETUP\TEST...
  4. B

    Simulating IR in ISIS Proteus

    proteus isis+pic In this circuit receiver TSOP1240.This IR module contains a demodulator block.If you remove it receiver circuit receives modulated signal and its undefined for receiver.First you look IR communications.This site is good. **broken link removed** If you do demodulator...
  5. B

    How to recognize my 3310 LCD's chip?

    mikrobasic 3310 lcd I cant use my 3310 lcd. I try Project: Connecting PIC to Nokia 3310 LCD **broken link removed** I try it but it doesnt work.How to recognize my 3310 LCD's chip?[/url]
  6. B

    What does LCDIN command do ?(PICBASIC)

    Re: PICBASIC help You know that command is only able to when you using MICROCODE STUDIO PRO version.if you look its help section you see this. LCDIN {Address,}[Var{,Var...}] Read LCD RAM at Address and store data to Var. LCDs have RAM onboard that is used for character memory. Most LCDs have...
  7. B

    Simulating IR in ISIS Proteus

    proteus ir Do u modulate the transmitting signal. What protocol do you using? I tried rs232 protocol to simulate in ISIS and it works. ISIS simulates two pics in a design. Do you try to in a circuit? May be it works.
  8. B

    6 or more ch. IR remote receiver

    This site is good for RC5 and RC6 encoder/decoder circuits. https://www.picbasic.nl/indexes_uk.htm
  9. B

    Infra Red Remote Control.

    Look this application notes from Atmel.
  10. B

    What are the protocoles used in IR remote controls?

    Re: IR protocoles This site is wery well. :::Ir teory:::: **broken link removed** ::::IR Decoder made for a Pic::::::::::Asm codes **broken link removed**
  11. B

    i need example code CCS PIC16F877 interface Sharp IS1U20 IR

    pic16f877a ccs example From www.rentron.com this is made PICBASIC but some information this page.I intrersted this subject if you find some information please post it there !! Added after 2 minutes: Sharp IS1U20 IR Receiver This receiver is same SFH506,PIC26043,TSOP11xx,TSOP12xx ect. TK19...
  12. B

    mobile control security system

    pic sms controller :::::::::You find this subject from :::::::::: **broken link removed** this program was written in PICBASIC language.
  13. B

    how to make a timer with 4 7-segment LED display

    7 segment led timer schematic Some applications notes from microchip. **broken link removed**
  14. B

    Character transmitting IR

    74hc132 I want to transmit ascii characters infra.My circuit is Form rentron.com.How to modulate this ascii symbols.Is 74HC132 differrent 74HCT132.
  15. B

    Which language is better for uC, Assembler or C?

    Re: assembler or C??? It's chances to project which you make.C programming simple then assembley because some macros was written Compilers manufacturer.But sometimes you need to care global and local variables and sometimes a variable is changes your reluctantly.But assembly language is the...

Part and Inventory Search

Back
Top