Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
at commands cms error 515
hello
i used this commands as below but i received +CMS ERROR: 515 again:1
1-power device on
RDY
+CFUN: 1
+CPIN: READY
Call Ready
at&f
OK
xt
ERROR
at
OK
AT+CMGF=1
OK
AT+CSCS="GSM"
OK
AT+CMGS="09177397256"
> hello
+CMS ERROR: 515
i applied the command with hyper...
+cms error: 515
i examine gsms with hyper terminal and i apply the same command to gsms
i dont know why works one of them??
i am sure that i dont send Invalid Character and i am waited long time for init or command processing but no answer to me
i am confused
what do you think of its??
Re: sim300c
hello
i have 2 sim300 ,i want send sms and i use the hyper terminal for applying commands
i have problem with one of gsms , i can send sms with one of them with these commands but another one say to me +CMS ERROR: 515 continuously
AT+IPR=9600
AT+CFUN=1
ATE1
AT+CMGF=1...
+cms error: 515
i examine gsms with hyper teminal ,why one of two gsm work exactly with my command but another one say to me +CMS ERROR: 515 continuously
i can't send sms with one of them
it's very confusing!!!
+CMS ERROR: 515
i examine gsms with hyper teminal ,why one of two gsm work exactly with my command but another one say to me +CMS ERROR: 515 continuously
i can`t send sms with one of them
it's very confusing!!!
cms error
hi
no, i dont send any character after "cntrl z" , i have 2 sim300 gsm are alike , i can send sms with one of them it is very fantastic because hardware of them is alike :D
i apply the same command and just work one of them
i think that problem is setting of gsm ,maybe???
is my...
hello,gsm man
i want to send sms but i receive it "+CMS ERROR: 515" after these commands :
AT+IPR=9600
AT+CFUN=1
ATE1
AT+CMGF=1
AT+CSCS="GSM"
AT&W
AT+CMGS="09360410831"
>INVALID GPS
ctrl z
:arrow:
+CMS ERROR: 515
what is reason of it??
there is any command that i didn't use ...?
:cry:
tcp error 5 sim300
hello
i want send data as below:
www.gps.golzarci.com/default.aspx?s1=...data...
i sometimes can send data but it isn't certainty
i have some problems for sending data with gprs:
1- i sometimes receive "closed" from gsm after apply "^z"
2- i sometimes receive its from gsm...
Re: sim300c
hello
i dont find any solution for gprs problem
i can't send long data with gprs and your suggestion command <"Connection: Keep-Alive" > dosn't help to me ...
i so mush need to solve its :cry:
please help me
thanks
Re: sim300c
i am sorry for simcom company
i worded with tc35i and no any problem
but with simcom.......
i have another problem that it is
i can read sms but i can't send sms
i occur with this error <+CMS ERROR: 517>
please see this commands:
AT+CMGF=1 <text mode>
OK...
Re: sim300c
HELLO MY FRIEND
i try to adding the line "Connection: Keep-Alive" as below:
AT+CIPSTART="TCP","www.gps.golzarci.com","80"
OK
CONNECT OK
AT+CIPSEND
> GET /default.aspx?s1=[TEST OK*TEST OK*TEST OK*TEST OK*TEST OK*TEST OK*TEST OK*TEST OK*TEST OK*TEST OK*] HTTP/1.1
Host...
cipsend return close
hello my friend
i can send data in my web site but i have one problem that it is
i saied that i am working with microcontroller and my data
is long ,about 120 charachter when i send my data as below ,gsm response is "closed"
AT+CIPSEND
> GET...
at+cgdcont, mtn
hello
i applied commands as below:
AT+CGATT=1
...
AT+CIPSTART="TCP","www.gps.golzarci.com","80"
OK
CONNECT OK
AT+CIPSEND
> GET /default.aspx?s1=[1*1*1*1*1*1*1*1*1*1*] HTTP/1.1
Accept: */*
Accept-Language: en -us
Host: **broken link removed**
:arrow:i received it...
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.
