Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by Asim Ali Khan

  1. A

    CST Active Element Pattern

    Hi guys, I am trying to model an array system and considering the active element pattern approch to include the mutual coupling effect. For this I tried two different approches. 1) I ran a small array simulation with all ports setting and then determined the Z matrix using the CST. I took a...
  2. A

    CST- Farfield magnitude and phase

    in cst what is farfield [1] Hello Guys, I am trying to get the phase information of a farfield pattern but all I can get from CST is magnitude (dB) plot. Can any one help me? Thanks in Advance
  3. A

    Is Drill file possible from ADS? How?

    Hi all I want to generate a drill file for my design is it possible to get one from gerber file or ADS? Help me Thx in advance
  4. A

    HFSS to ADS design Export: Help Plz

    Thx I will try wht u hv told me. Actually i need a gerber file for my design. Thx again
  5. A

    HFSS to ADS design Export: Help Plz

    hfss gdsii export Hi all, I need to export my design from HFSS to ADS. Can any one help me with this. Thx in advance Asim
  6. A

    Transition Microstrip to Rec waveguide using HFSS

    Dear Azulykit I am talking about microstrip to SIRW structure. Now I have a problem with HFSS simulation. When I run the validity check it gives me all ticks but when I start simulation it gives me error saying "Not enough triangular structers to model blah blah ...." Secondly, I have...
  7. A

    Transition Microstrip to Rec waveguide using HFSS

    Thx for ur suggestions guys. Let me clear one thing in my case both the waveguid and microstrip line are on the same PCB i.e. integrated on PCB. But I do not understand "SIC" wht is this? Added after 10 minutes: Thx for ur suggestions guys. Let me clear one thing in my case both the...
  8. A

    Transition Microstrip to Rec waveguide using HFSS

    Dear All I am dealing with the transition from microstrip line to waveguide both are on substrate (PCB). I hv poblem assigning the excitation for my design. Actually I have three layers in my design one is the PCB substrate and the other two are copper layers sandwitching the substrate. How...
  9. A

    Substrate integrated rectangular Waveguid, guidance needed

    Hi All I hav assigned a project of desigining a SIRW structure. If any body can provide any refferences to the theory and design of SIRW I shall be thankful. Thanks in advance
  10. A

    Help Required: Digital Beamforming Basics

    Dear all I am new to the concept of digital beamforming. I want to make some basic understanding of this tilte. I searched for my self but I could not find as much I want. so pls if anybody can help me in this regard like indicating some good books or material available on internet i shall be...
  11. A

    Best School for Antenna Propagation & Microwaves in UK??

    Salam All which one is the best school for Antenna Propagtion & Microwave Engineering in UK, Phd studies. Please suggest I shall be very thankful. Regards Asim
  12. A

    Looking for books to learn ADS

    Re: ADS Usage + book Salam All There is practice manual available as well. that manual is really good for begners. i have the hard copy. u may be able to download it from some where, if not tell me. Although the help provided with ADS is also good to use. Regards
  13. A

    Recommend resources to start studying about radars

    Re: radar Salam all For radar simulation I will recmmoned the book named Radar simulations using Matlab by Atef. But for that you should have some back ground or basic knowlegde of radar theory. Though this book also gives you some revision of theory as well. in fact this is really good if you...
  14. A

    how to draw triangle in HFSS?

    equation based surface hfss Salam I have used the HFSS, though not much. Still I am learning about it. According to my experience you can not draw the triangle it self. But if you want to make some conical shape that is possible. As in the case of horn antenna just it is matter of conecting...

Part and Inventory Search

Back
Top