Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by asifrehmat

  1. A

    SDRAM sometimes works sometimes not

    constrains done wrongly in *.UCF files
  2. A

    RTD interfacing program

    Give more details.
  3. A

    T610 or T630 as SMS controller

    save in memory cnmi value t630 I did it with t290.
  4. A

    SMS using microcontroler

    I did this project using Ericson t-290. It is straight formward.
  5. A

    Questions about uln2003

    ic uln2003 I agree with cristi7521
  6. A

    help regarding Image processing using C

    Intel Image Processing Library (IPP, integrated performance primitives) is a good API but expansive. You can also use OpenCV which is free. You can read image and do many things in it.
  7. A

    in system prorramming using at89s52

    Get it from here: www.sixca.com/eng/articles/at89s_isp/
  8. A

    How to fill vias so they are airtight?

    Filling Vias? I agree with eswar_babu77
  9. A

    WHICH IS FAST? BJT or MOS

    which is faster bjt or mos BJT is much faster than MOS
  10. A

    Problem with using the interrupt in powerPC/Microblaze of Xilinx EDK

    Xilinx EDK Can you explain your questions/doubts.
  11. A

    Question about the behaviour of an I2C which is acting as a master

    i2c master behaviour It should not transmit the slave address after finding the nack.
  12. A

    [SOLVED] Sip protocol analyzer

    sip protocol analyzer Check the following site: https://sourceforge.net/projects/sipanalzyer/
  13. A

    Simulation and synthesis tools for VLSI that work on Linux

    hi Cadence tools like virtuoso, spectre, dracula are very good tools for ASIC design.
  14. A

    interfacing adc0804 to 89s52

    You can connect to P2. or P0 with pullups.
  15. A

    10 layer PCB stackup for high speed signals

    You can see the details from the following link: http://www.hottconsultants.com/techtips/pcb-stack-up-5.html
See more

Part and Inventory Search

Back
Top