Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by antonio rosario

  1. A

    Can I use BT139-800 or BT139-800E equivalent Triac for T16C8 ?

    sorry moderator. here I am attaching image files once again.
  2. A

    Can I use BT139-800 or BT139-800E equivalent Triac for T16C8 ?

    Can I use BT139-800 or BT139-800E ? I am a beginner in electronics and trying to fix 875VA & 675VA inverter boards. Both inverters have problem in charging section. one inverter is taking high current from battery while inverter is on and then battery low indicates then inverter goes off and...
  3. A

    Buck is not working in AC stabilizer...

    @BradtheRad checked the relay with external 12v DC and connected the relay contacts with multimeter in diode mode, relay contacts are working fine. power supply to relay have BD139 transistor and checked with multimeter. its giving value and not shorted. also same with Diode, no shorted or open...
  4. A

    Buck is not working in AC stabilizer...

    pictures uploaded. Thanks moderator.
  5. A

    Buck is not working in AC stabilizer...

    Hi, when input voltage is high, output voltage of the stabilizer also high. I am a beginner in electronics. Buck is not working in AC stabilizer. Find no physical damage on the PCB. relay contacts working fine. tried checking diodes and transistor for relay to on off, all are with multimeter...
  6. A

    Can I use 5000uF 50V instead of 4700uF 50V in Inverter 700VA output rating board ?

    sorry. I have no schematics. I found bulgy capacitor in my so I tried to replace it with new so shop keeper told suggested 5000uF. since I am not aware of the ratings then I have bought 4700uF capacitor.so raised a question here to know whether he is right or not. Inverter model is Microtek...
  7. A

    Can I use 5000uF 50V instead of 4700uF 50V in Inverter 700VA output rating board ?

    Can I use 5000uF 50V instead of 4700uF 50V in Inverter 700VA output rating board ?
  8. A

    [SOLVED] Mahindra Inverter continuous beep sound and all led glowing except battery indicator

    There is no change if I unplug from inverter output still all led glows only one 220volt AC LED is connected at inverter output so it can't be overload Also battery is charged and 6 months old Its a fixed Input supply (220Volt) There is no owner's manual for troubleshootings. Nearly 8 years...
  9. A

    [SOLVED] Mahindra Inverter continuous beep sound and all led glowing except battery indicator

    Led's labled as "Mains" "low battery" "overload" "UPS on" all these led glows
  10. A

    [SOLVED] Mahindra Inverter continuous beep sound and all led glowing except battery indicator

    I have my Mahindra powerol inverter 1000VA making continuous beep and all led glow except battery indicator on inverter panel . should I change the PIC16F72 or any resistor ? Kindly help me Thanks

Part and Inventory Search

Back
Top