Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Register Log in

Recent content by angel_eyes

  1. A

    gps sim300d gprs module performance

    gps gprs I wonder how do you know that ? :D
  2. A

    datasheet, at-summery sim300c

    I attached SIM 300 AT Command (PDF file). This will be helpful for you :)
  3. A

    gps sim300d gprs module performance

    gps gprs I don't think that SIMCOM do not use SIRFIII in their products when they say in the specs they do use it. As I've known, SIMCOM & WAVECOME is the only 2 companies produce GPRS modules. So, SIMCOM is a big one, anyway :)
  4. A

    FIFO queue for storing the data

    FIFO Design Doubts I am not sure about what you want to do with your own FIFO system, so if my reply do not fit your need, just pass it :). If you want to read and write FIFO at different clock frequencies, just place read code and write code in 2 different sections that will be done at 2...
  5. A

    gps sim300d gprs module performance

    gps gprs SIM508, SIM548C both use sirfIII :) You can see their specs ^^
  6. A

    PIC16F877A and SIM300CZ problem connection

    Have you sent at command "AT+CMGF=1" yet?
  7. A

    gps sim300d gprs module performance

    gps gprs SIM508 is not supported anymore. Use SIM548C is the best available now. I have used SIM548C for my applications. It's good.
  8. A

    Where is Gerber Tool in Cadence 16.2?

    I tried but can not access .gtd files :(
  9. A

    Where is Gerber Tool in Cadence 16.2?

    Sorry, but can you tell me more clearly? Where is the "Tools Art work tab" that you mean? I can't find it. Thanks.
  10. A

    Where is Gerber Tool in Cadence 16.2?

    I usually use Gerber tool for process gerber files created from Orcad Layout (using Tearsdrop, save Gerber file as a lower version). I can find it in Orcad 16.0 but when I try Cadence 16.2, I can't find Gerber Tool. Do you know where it is? Or there is a replacement for it? Would you please...
  11. A

    PIC 18F series and SD storage

    Re: How to read data from MMC using PIC microcontroller ??? Oh, I wonder that why you don't use 25LC512 or 1024 to do this? It will be much more easier. In my opinion, MMC Cards is useful when we can access data stored like a computer. Anyway, I think you have got a reason to do like that...
  12. A

    How to Recieve GPS Signal

    surely you can :) You need an GPS modem to do this. Usually, GPS modems will process GPS signal from satellites and send out the results using I2C or SPI interface. You just need a microcontroller to process data and do anything you want. Good luck with your final year :)
  13. A

    vehicle tracking with gps/gprs

    Re: good gps vehicle tracking Ctrl + Z is charater which has ASCII key code is 0x1A (You just need to send byte 0x1A to RS232, like you send 0x0D = '\r' and 0x0A ='\n')
  14. A

    PIC 18F series and SD storage

    How to read data from MMC using PIC microcontroller ??? You can try Microchip's Libraries (MDD File System, included in Microchip Application Libraries). My friend have used this one and he can read/write/create/delete a .txt file or a directory in MMC card.
See more

Part and Inventory Search

Back
Top