Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.
interpolation raised cosinus
hi,
any one give the concept about the interpolation after the raised cosine filter at the trans end to maintain the similarity with the carrier clock frequency?
are what is the use of this interpolation after the filtering?
thank you
fpga out to dac
hi every one,
which factors will effect the level of the DAC where the fpga is the source to the DAC ,
Is ther any generally considered value is there for that level from DAC so that we can compare with that value and know that our DAC output is good enough.
please clear my...
supply to tranformer
hi ,
im using a passive transformer in my application,
the suggesting circuit says that the 3.3v supply is connected to center tapping point.
what happened when supply is applied to passive tranformer.
Regards
among
passive transformer
hi
im using a passive transformer for my design after DAC.
may be this will be a stupid question but i need the clarification,
generally why we use this?
thank you
cascading saw filters
hi every one,
when i was testing my trans unit i observe that two saw filters in cascade will give more rejection in stop band.
how it is possible? any one explain me this concept plz.......
thank you
regards
among
any tell me the different procxedures to implement the fir filter in the fpga(xilinx)and give some guidelines to follow to get the filter implemented
thank you
to implement fir filter in fpga using multipliers what is the procedure,any one explianme plz
and also for this case also do we need coefficients from matlab or not?
clarify mt doubt
thank you
hi
why we are using the if frquency as 140mhz or 240mhz frequently in our designs in military applications or any ware else
plz clarify my doubt plz
thank you
hi
im using matlab fdatool for designing my fir filter.what is the procedure here to follow in this tool to get the coefficients for my fpga (xilinx).
any one tell me, and help plz
thank you
hi
how to code the fpga to implement our design on that
here i really mean that for example:
if i need to implement FIR filter in fpga what are the variables i have to use in my vhdl code and how can i learn this
thank you
hi
i have to use fpga for my digital modulator design , im confusing with the clock signal implementation in fpga ........
how we decide that the clock valueand y it is different for different blocks with in fpga
any one explain me plz
thank you
hi
i have ny code in MATLAB for altera stratix FPGA , but i have to work on the vhdl coding IM NEW TO THIS FIELD,
ANY ONE TELL ME THE WAY TO TRANSLATE THIS CODE TO VHDL CODE.
THANK YOU
hi
what are the internal componenets we used for the frequency generation(carrier ,clock)in the FPGA tell em those working concept to gene rate waveforms.
thank you
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.