Continue to Site

Welcome to EDAboard.com

Welcome to our site! EDAboard.com is an international Electronics Discussion Forum focused on EDA software, circuits, schematics, books, theory, papers, asic, pld, 8051, DSP, Network, RF, Analog Design, PCB, Service Manuals... and a whole lot more! To participate you need to register. Registration is free. Click here to register now.

Recent content by Abhishek Kakkar

  1. A

    Nokia 3310 LCD shows only 5 rows of byte-wide pixels

    mUNISH, This is exactly as was in my Display before the new code, Actually the display chip drives 102x67 pixels, but only the top left 84x48 pixels are displayed. This explains why the 11 rows are garbage, as they have not been cleared yet! They are filled with undefined/random data after a...
  2. A

    HOW TO CONNECT PHONE CAMERA TO A MCU. HELP PLS

    interfacing camera with mcu The site of sparkfun electronics has the cam of a Samsung SGH-E700 here For interfacing, read this forum: **broken link removed**
  3. A

    LCD graphic S1D15G00 (Nokia 6100 LCD)

    nokia 6100 lcd Display invert is in the sense that the display will appear 'negated', as if in a photographic negative. All colors are replaced by their complementary colors for example: white for black, cyan (RGB=#00FFFF) for red(RGB=#FF0000), etc. Complementary colors are such that color+its...
  4. A

    Nokia 3310 LCD shows only 5 rows of byte-wide pixels

    philips pcd8544 parallel port pc I live in India. I have also got a similar problem, which was rectified by the display offset settings. However, the wrap-around feature used to drop two characters of 6x8 Font used with the display, which I corrected by using a software address counter. Hence...
  5. A

    89s52 program using serial port

    74lvc244 mosi i think its a 10K SIL Resistor network
  6. A

    reqd help in AM/FM radio digital tuning

    but how to put it into an application? I want a proper circuit
  7. A

    How to use Graphics LCD?

    how to use a grahics lcd display The KS0108 And S6B0108 are different names of the same chip. They have no built in ROM for characters and have to be programmed. The fonts have to be implemented by your firmware. And Yes, Your LCD should be having 4 chips - 2 S6B0108/KS0108 and 2...
  8. A

    89s52 program using serial port

    isp programmer adam dybkowski setup Sunrom has discontinued the snatsz programmer, but I have found out the schematic of the programmer. It is available under a new name - AT89SXX in-circuit programmer. Get the pre-programmed firmware chip for the AT89SXX In-circuit programmer from sunrom...
  9. A

    89s52 program using serial port

    download at89isp software Try this- It is also a programmer for at89s52 and maybe AT89S51 https://mytutorialcafe.com/Microcontroller Project Thesis Programmer89S Serial.htm
  10. A

    FM Receiver ICs please..

    The Philips TEA5710 and 5711 is also good
  11. A

    How do I use the TEA5712 DTS Radio Circuit from Philips?

    How do I use the TEA5712 DTS Radio Circuit from Philips?
  12. A

    Electronic Tuner for FM Radio

    -Can any one can give me a circuit for a Electronic FM Tuner using a microcontroller and a varicap for a TEA5710 FM Receiver? -Can anyone give me a recommendation on a DTS FM Radio in a DIL Package? except the Philips TEA5712? -How can I tune a standard FM receiver electronically, as by...
  13. A

    Help me with designing super FM receiver

    Re: Super FM Receiver But I want a philips IC!!!!! Ok, Can you please give me a hybrid FM Receiver that has analog as well as digital counterparts?
  14. A

    Which PCB tool to choose?

    East or west, Eagle Light Is the best :D
  15. A

    Help me with designing super FM receiver

    Super FM Receiver Can anybody please help me? I am trying to build a fully digital FM Receiver which has digital signal processing and the frequency of the station can be displayed on an HD44780 Alphanumeric Display Module through a AT89S52 micro and can be selected through a keyboard. For...

Part and Inventory Search

Back
Top