electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

How to use LUT, give a simple examples ?


Post new topic  Reply to topic    EDAboard.com Forum Index -> PLD, SPLD, GAL, CPLD, FPGA Design > How to use LUT, give a simple examples ?
Author Message
hoangthanhtung



Joined: 23 Apr 2004
Posts: 173
Helped: 2


Post15 Nov 2004 4:59   

How to use LUT, give a simple examples ?


I have read some information about LUT in FPGA, but I wonder that How to use LUT in Verilog program for Altera chip.

Anybody can load a simple program use LUT by verilog for me and compare the perfomance with the program without using LUT ? I am confusing about LUT
definition and can not make it clearly.

In addition, I try to design a fast multiplier using ROM, anybody can share some information or give me some recommendation ?

Many thanks
Back to top
Google
AdSense
Google Adsense




Post15 Nov 2004 4:59   

Ads




Back to top
z81203



Joined: 01 Aug 2001
Posts: 482
Helped: 3


Post15 Nov 2004 5:59   

How to use LUT, give a simple examples ?


Hi, I think you don't need care about that. All the things that you do is write rtl code or drawing schematic. How to match you code with FPGA's LUT is FPGA tools must to do. Synthesis, P&R etc.
Back to top
hoangthanhtung



Joined: 23 Apr 2004
Posts: 173
Helped: 2


Post15 Nov 2004 10:38   

Re: How to use LUT, give a simple examples ?


z81203 wrote:
Hi, I think you don't need care about that. All the things that you do is write rtl code or drawing schematic. How to match you code with FPGA's LUT is FPGA tools must to do. Synthesis, P&R etc.


Thank you but I still wonder about LUT because when I write RTL code and simulation it with other type of FPGA. The perfomance is different and I want to explain it, I think that performance depends on size of LUT in each FPGA chip. Because I try to write some FFT code and design FIR so I have to learn about the structure of LUT to optimize the delay time.

Thank again
Back to top
Jackwang



Joined: 12 Nov 2004
Posts: 167
Helped: 2


Post17 Nov 2004 14:12   

How to use LUT, give a simple examples ?


I think that it don't consider it for simulation tool can generate corresponding result.
you can try to synthesis a VHDL program, and you can find the usage about LUT.
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> PLD, SPLD, GAL, CPLD, FPGA Design > How to use LUT, give a simple examples ?
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
Pls give examples on how to apply V-uS stated in datasheet (1)
why do we need to use scan def, examples of use (1)
How to configure the LUT? (1)
LUT RAMS--virtex4 how to implement (3)
how to read LUT in pic18f452? (1)
How to use simple circuit to converter +5V to -5V (15)
how to create a LUT for implementing FM (1)
Xilinx ise: How to map my fifo on LUT? (2)
Can you give me some examples of the amplifier layout ? (1)
SPARTAN-3 F-LUT AND G-LUT (2)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS