Making a usb controller or usb interface with avr and pic

EDAboard.com Forum Index -> Microcontrollers -> Making a usb controller or usb interface with avr and pic

Author

Message

Fragrance

Joined: 26 Jul 2002
Posts: 1385
Helped: 24

20 Dec 2003 13:06 Making a usb controller or usb interface with avr and pic

hi

here is link to make your own usb interface with avr or pic micro

http://www.cesko.host.sk/IgorPlugUSB/IgorPlug-USB%20(AVR)_eng.htm

Google
AdSense
Google Adsense

20 Dec 2003 13:06 Ads

ME

Joined: 14 Mar 2002
Posts: 1523
Helped: 13

20 Dec 2003 14:37 Re: Making a usb controller or usb interface with avr and pi

Where is the USB inteface for PIC Question

Please read the contens of the link before you post it!
I can only see an USB interface for AVR.
The PIC is too slow to make a software USB interface (maybe the new PIC18 is fast enough if it is overclocked???).

Text from the link:
Firstly I choose PIC16F84-20, with which I have experiences. To ensure synchronizing with USB clock and speed increasing was used microcontroller clock 24MHz = 6MIPS (PIC was slightly overclocked). For one bit from USB processing were 4 instructions (4=6MIPS/1.5Mbit for LowSpeed USB). I reject this solution (after some time) - PIC is too slow (and in addition the no so good instruction set ...) .

Anyway the IgorPlug link have been posted many times before.

There is a 2nd link for AVR USB:
USB-RS232 converter + USB-8/16bit converter + USB-EEPROM scratch pad based on cheap AVR microcontroller
www.cesko.host.sk/IgorPlugUSB_RS232/IgorPlug-USB%20(AVR)%20RS232_eng.htm