| Author |
Message |
sanjay
Joined: 04 Jul 2003
Posts: 117
|
 26 Nov 2003 11:23 Hi neel help for flash programming At91R40807 Arm Processor |
|
|
|
|
Hello All,
Help would be appreciated with the following problem.
I am using Atmel's Board eb40 which has AT91R40807 processor on it with an ARM7TDMI processor core..
From the atmel board we downloaded the EBLOAD software tool for programming the board..
While trying to flash program one of the very basic program "LED_BLINK"
IT says that under the software the Flash Menu should get updated , but this never seems to happen only..
Can anyone help.. or can anyone suggest wht other flash programmer we can try for this processor...
Help would be appreciated
Thanks
Sanjay
|
|
| Back to top |
|
 |
Google
AdSense
|
26 Nov 2003 11:23 Ads |
|
|
|
|
|
|
| Back to top |
|
|
gaspo100
Joined: 17 Dec 2003
Posts: 1
|
17 Dec 2003 6:49 Re: Hi neel help for flash programming At91R40807 Arm Proces |
|
|
|
|
Hi,
the EBLoad on Atmel's web site is not the latest. Try downloading version 1.1 from RTJ Computing's website:
http://rtjcom.com/download
look at the bottom of the page.
When you start EBLoad, goto to preferences and make sure you selected correct board type. On the main screen select the serial port that is connected to eval. board port A.
To program flash, you have to first boot board in flash loading mode, then in the EBLoad synchronize with the flash loader by pressing F3 (or menu Flash/Synchrinize). Open the file image (File/Open) you wish to program and then hit F6 (Flash/Write) to transfer the image to the board.
Peter
|
|
| Back to top |
|
|
HMaier
Joined: 05 Dec 2001
Posts: 30
|
18 Dec 2003 22:35 Re: Hi neel help for flash programming At91R40807 Arm Proces |
|
|
|
|
Hi,
Close jumper J7. There is a mistake in the documentation of the EB40.
Good Luck
HMaier
|
|
| Back to top |
|
|
