Rules | Recent posts | topic RSS | Search | Register  | Log in

If anybody need help in EAGLE, ask me in this POST !
Goto page Previous  1, 2, 3 ... , 12, 13, 14  Next
Jump to page:

 
Post new topic  Reply to topic    EDAboard.com Forum Index -> PCB Routing & Schematic Layout software & Simulation
Author Message
Int Art



Joined: 15 Dec 2001
Posts: 74
Helped: 2
Post25 Feb 2007 16:13   Re: If anybody need help in EAGLE, ask me in this POST !
vsmGuy wrote:
I want to place 10 LEDs every 1cm - that is each LED will have a distance of 1 cm between them in a straight line.

How do I do this placement in EAGLE ?


use command grid, change unit to mm and size to 10
place the components and change everythig back.
Back to top
nvd



Joined: 17 Jan 2005
Posts: 109
Location: Under Heavens
Post26 Feb 2007 5:23   Flood Fill
How can I flood fill the empty regions of the PCB with copper (after autorouting is done). This will expose less area to be etched and thus there will be a less consumption of etchant.
Back to top
M!k



Joined: 22 Apr 2002
Posts: 812
Helped: 69
Post26 Feb 2007 11:43   Re: If anybody need help in EAGLE, ask me in this POST !
click "Polygon", type Gnd (or however your ground is named) if you want to have the copper area being connected to Gnd, choose an appropriate width > 0 (unless you want to bother your PCB manufacturer Wink ) and draw a frame around the board. You can see the plane after clicking "Ratsnest" - that's it
Back to top
dz99



Joined: 13 Feb 2006
Posts: 75
Helped: 4
Location: Between East and West Europe
Post01 Mar 2007 12:49   Re: If anybody need help in EAGLE, ask me in this POST !
Hi!

I'm a rush, to convert some files from DXF format to Eagle. Can anybodey help me with advices? I tried ftp://ftp.cadsoft.de/eagle/userfiles/misc/dxf2scr.zip but (maybe I'm wrong with the units? [inch,mil]) it doesnt succes the conversion Sad

I tried also the ftp://ftp.cadsoft.de/eagle/userfiles/misc/eagle_power_tools_415a.exe Which is works Very Happy but it is just a limited demo, cuts down the board line number Crying or Very sad

Please help somehow!
Lot of thanks!

Z
Back to top
cloud



Joined: 03 Oct 2006
Posts: 26
Post16 Apr 2007 18:31   Re: If anybody need help in EAGLE, ask me in this POST !
Hello everyone!

I'm using the freeware version of Eagle right now and i already consumed the maximum allowable dimension of a .brd file. I want to know how we can print multiple copies of one .brd file on same page.

Thanks a lot in advance guys!
Back to top
vsmGuy



Joined: 26 Jun 2006
Posts: 445
Helped: 23
Post16 Apr 2007 22:58   If anybody need help in EAGLE, ask me in this POST !
@cloud

This is called panelization. I do it by exporting the PCB to PS and then opening it up in Adobe Illustrator and laying out multiple copies
Back to top
CMOS



Joined: 06 Jan 2004
Posts: 672
Helped: 26
Post17 Apr 2007 21:09   Re: If anybody need help in EAGLE, ask me in this POST !
vsmGuy wrote:
@cloud

This is called panelization. I do it by exporting the PCB to PS and then opening it up in Adobe Illustrator and laying out multiple copies

You can also copy and paste multiple copies of your PCB design into a new board file (Enable all layers prior to copying). This is a better method since you can also generate Drill file for the entire panel.
Back to top
vsmGuy



Joined: 26 Jun 2006
Posts: 445
Helped: 23
Post18 Apr 2007 2:38   Re: If anybody need help in EAGLE, ask me in this POST !
CMOS wrote:
vsmGuy wrote:
@cloud

This is called panelization. I do it by exporting the PCB to PS and then opening it up in Adobe Illustrator and laying out multiple copies

You can also copy and paste multiple copies of your PCB design into a new board file (Enable all layers prior to copying). This is a better method since you can also generate Drill file for the entire panel.


I actually don't know how to do that myself Sad

How do I do it ? Group and copy / paste does not seem to work !
Back to top
Int Art



Joined: 15 Dec 2001
Posts: 74
Helped: 2
Post18 Apr 2007 4:19   Re: If anybody need help in EAGLE, ask me in this POST !
[quote="vsmGuy"][quote="CMOS"]
vsmGuy wrote:
@cloud


How do I do it ? Group and copy / paste does not seem to work !


group cut and paste

make this using a backup copy of .brd because you will lose consistency with the schematic
Back to top
CMOS



Joined: 06 Jan 2004
Posts: 672
Helped: 26
Post18 Apr 2007 4:26   Re: If anybody need help in EAGLE, ask me in this POST !
vsmGuy wrote:
CMOS wrote:
vsmGuy wrote:
@cloud

This is called panelization. I do it by exporting the PCB to PS and then opening it up in Adobe Illustrator and laying out multiple copies

You can also copy and paste multiple copies of your PCB design into a new board file (Enable all layers prior to copying). This is a better method since you can also generate Drill file for the entire panel.


I actually don't know how to do that myself Sad

How do I do it ? Group and copy / paste does not seem to work !

Select your entire board using Group, Cut it, Create a new board file and paste as many copies you want in this new file and save it with a different name.
Back to top
cloud



Joined: 03 Oct 2006
Posts: 26
Post22 Apr 2007 9:28   Re: If anybody need help in EAGLE, ask me in this POST !
Thank you guys for the support.

For my small circuits that does not consumed the entire space, i will definitely use the technique you guys suggested. Thanks a lot!

But the problem is i only have the light edition of eagle. So the board dimension is quite restrticted to 3 by 4 inches only, i think. Hence, my circuit has already occupied the entire space. Is there any other means we can solve this guys?
Back to top
vsmGuy



Joined: 26 Jun 2006
Posts: 445
Helped: 23
Post23 Apr 2007 1:08   If anybody need help in EAGLE, ask me in this POST !
I do it by exporting the PCB to PS and then opening it up in Adobe Illustrator and laying out multiple copies
Back to top
cloud



Joined: 03 Oct 2006
Posts: 26
Post23 Apr 2007 2:40   Re: If anybody need help in EAGLE, ask me in this POST !
Thanks vsmGuy for the tip but unfortunately i don't have any Adobe Illustrator. Is it freely downloaded in some websites?
Back to top
vsmGuy



Joined: 26 Jun 2006
Posts: 445
Helped: 23
Post24 Apr 2007 2:38   If anybody need help in EAGLE, ask me in this POST !
Try searching Google for "Adobe Illustrator 10 trial"

Hope your problem is solved. If so, please click on the "Helped Me" button.
Back to top
dz99



Joined: 13 Feb 2006
Posts: 75
Helped: 4
Location: Between East and West Europe
Post12 Sep 2007 11:02   Re: If anybody need help in EAGLE, ask me in this POST !
Hello All!

I would like to change the default grid size (the config file)under SCH editor.
Where could I find the configuration file, and which part have to edited?

The problem is: Eagle always forget the grid size, grid type settings at the SCH part, at new startup.

Thanx!
Back to top
Pijarn



Joined: 03 Oct 2007
Posts: 1
Post03 Oct 2007 8:43   Re: If anybody need help in EAGLE, ask me in this POST !
Hello!

I am using Eagle 4.11 and I would like to create a script to automatically get a printout of my schematics.

Unfortunately, my schematics are displayed on several sheets, and I cannot find a command that allows me to select Sheet number xx, print it with defined rotation/zoom options, then select next sheet, etc...

Is the "Print" dialog box the only possibility to select which sheet to print?

Thanks
Back to top
george1



Joined: 19 Nov 2001
Posts: 67
Helped: 1
Location: India
Post03 Oct 2007 12:42   Re: If anybody need help in EAGLE, ask me in this POST !
Hello
Is there anyway to generate pads format netlist from eagle schematic ?
Thanks
George
Back to top
CMOS



Joined: 06 Jan 2004
Posts: 672
Helped: 26
Post04 Oct 2007 0:24   Re: If anybody need help in EAGLE, ask me in this POST !
Pijarn wrote:
Hello!

I am using Eagle 4.11 and I would like to create a script to automatically get a printout of my schematics.

Unfortunately, my schematics are displayed on several sheets, and I cannot find a command that allows me to select Sheet number xx, print it with defined rotation/zoom options, then select next sheet, etc...

Is the "Print" dialog box the only possibility to select which sheet to print?

Thanks

When you click File->Print, a print option dialog is displayed in which you can choose which sheet(s) you want to print. Here you can also set the print scale factor, rotation etc.
Back to top
mountainch



Joined: 06 Oct 2007
Posts: 3
Post06 Oct 2007 6:43   Re: If anybody need help in EAGLE, ask me in this POST !
can anyone help me???

http://www.edaboard.com/ftopic274938.html
Back to top
wormterp



Joined: 29 Oct 2007
Posts: 1
Post29 Oct 2007 17:04   Re: If anybody need help in EAGLE, ask me in this POST !
I am currently building an 80mm x 100 mm board. I ned to cut a hole in the middle of it that is 35mm x 12 mm can anyone tell me how to do this. I have tried using the polygon and the rectangle using every restrict and stop layer. I have alos tried making a part to be the hole but none the less I when I press auot route it routes right through where I want to drill a hole.

Any help would be great thanks.
Wormterp
Back to top
Old Nick



Joined: 14 Sep 2007
Posts: 404
Helped: 49
Post29 Oct 2007 17:12   Re: If anybody need help in EAGLE, ask me in this POST !
wormterp wrote:
I am currently building an 80mm x 100 mm board. I ned to cut a hole in the middle of it that is 35mm x 12 mm can anyone tell me how to do this. I have tried using the polygon and the rectangle using every restrict and stop layer. I have alos tried making a part to be the hole but none the less I when I press auot route it routes right through where I want to drill a hole.

Any help would be great thanks.
Wormterp


Polygon using the dimension layer (layer 20). The pcb manufacturer will cut this out.
Back to top
dz99



Joined: 13 Feb 2006
Posts: 75
Helped: 4
Location: Between East and West Europe
Post16 Nov 2007 10:18   Re: If anybody need help in EAGLE, ask me in this POST !
Hi everyone!

A quest of mine: how could I write "Ω" in schematic, for the resistor value? It is urgent, not because of me, but silly non-electrical-interst-dilettante people!

You got the point of course, when you help me! Wink

Bye!
Z
Back to top
ep20k



Joined: 17 Sep 2002
Posts: 289
Helped: 14
Post17 Nov 2007 16:01   Re: If anybody need help in EAGLE, ask me in this POST !
The only way IMHO is importing an image of the letter 'Omega'. BMP works pretty good.

Regards, ep20k
Back to top
dz99



Joined: 13 Feb 2006
Posts: 75
Helped: 4
Location: Between East and West Europe
Post18 Nov 2007 16:01   Re: If anybody need help in EAGLE, ask me in this POST !
Of course I know this trivial way. The problem is, I want to use 'Omega' in for instance resistor valvue field, you know. Bitmap useless for that.

Thanks, btw.


ep20k wrote:
The only way IMHO is importing an image of the letter 'Omega'. BMP works pretty good.

Regards, ep20k
Back to top
dz99



Joined: 13 Feb 2006
Posts: 75
Helped: 4
Location: Between East and West Europe
Post28 Nov 2007 17:01   Re: If anybody need help in EAGLE, ask me in this POST !
An other question guys!

How could somebody do orthogonal movement in Eagle layout? (like in orcad you know, restricted movment to X or Y direction)

The another quest is, how could I fix the grid spacing value in the schematic editor? Under windows. Maybe I have to overwrite some config files?

Thanx!
Back to top
SmartBomb1979



Joined: 09 Apr 2006
Posts: 42
Helped: 5
Post28 Nov 2007 17:09   Re: If anybody need help in EAGLE, ask me in this POST !
OK here's a question -- you know how there are Eagle discussions (newsgroups) at news.cadsoft.de? Requiring a newsreader like Thunderbird of course....

Do you know if there is there a mirror of them on the web somewhere? (e.g. news-to-mail gateway, such as Gmane.)

I can't believe in this day & age they don't have proper forums (like this) or at least something like Yahoo! Groups....

Thanks.
Back to top
shafee001



Joined: 06 May 2004
Posts: 116
Helped: 12
Location: Egypt
Post29 Nov 2007 9:21   Re: If anybody need help in EAGLE, ask me in this POST !
dear SyNTaXer
how can i convert eagle file *.brd to orcad 9 file

thanks a lot
Shafee001
Back to top
dz99



Joined: 13 Feb 2006
Posts: 75
Helped: 4
Location: Between East and West Europe
Post03 Dec 2007 14:21   Re: If anybody need help in EAGLE, ask me in this POST !
Hi!

Is there any way, to draw polygons, wires, etc. from the Eagle's ULP program? (instead from SCR)?

I calculate a polygon from ulp, and I want to draw it into eagle, thats the point.
Thanks!
Back to top
dz99



Joined: 13 Feb 2006
Posts: 75
Helped: 4
Location: Between East and West Europe
Post08 Dec 2007 19:24   Re: If anybody need help in EAGLE, ask me in this POST !
Somebody pleaseeee! Neutral

Now I have the ULP code, just need to combine it with the script language.
Back to top
SmartBomb1979



Joined: 09 Apr 2006
Posts: 42
Helped: 5
Post09 Dec 2007 2:04   Re: If anybody need help in EAGLE, ask me in this POST !
Looks like Syntaxer's heart was in the right place but he's left the building. Wouldn't count on much help in this old thread. Probably better to start a new one with a new Eagle question. Also try news.cadsoft.de.
Back to top
Post new topic  Reply to topic    EDAboard.com Forum Index -> PCB Routing & Schematic Layout software & Simulation
Page 13 of 14 All times are GMT + 1 Hour
Goto page Previous  1, 2, 3 ... , 12, 13, 14  Next
Jump to page:


Abuse
Administrator
Moderators
topic RSS 
sitemap