| Author |
Message |
hadihf
Joined: 29 Mar 2002 Posts: 136 Location: Planet Earth
|
18 Nov 2003 6:10 lc meter aade |
|
|
|
|
Hi,
You have the incorrect fuse settings, reprogramm with
WDT - off
BOD - on
OSC - XT
Regards
|
|
| Back to top |
|
 |
Saulius
Joined: 03 Dec 2003 Posts: 10
|
03 Dec 2003 20:46 l/c meter hex fil |
|
|
|
|
Hi,
I built this http://www.hw.cz/constrc/lc_metr/ LC meter. Now I need to calibrate it. So the question is not about calibration, but about coil used in LC meters. What kind of coils are you using? Do you wind it manualy or you use factory made coils? For the test I use the 150 uH choke (small green like resistor). I'm not sure could I use it?
Thanx.
Saulius
|
|
| Back to top |
|
 |
pool_77
Joined: 08 Aug 2001 Posts: 220
|
03 Dec 2003 22:07 pic16f84 lc meter |
|
|
|
|
You can use it...
but:
if you use L with high serial resistance, you will lose accuracy on higher capacitors (e.g. 100n and up, which have not good Q - paper, and some plastic).
|
|
| Back to top |
|
 |
Saulius
Joined: 03 Dec 2003 Posts: 10
|
04 Dec 2003 9:00 lc meter brief |
|
|
|
|
| pool_77 wrote: |
You can use it...
but:
if you use L with high serial resistance, you will lose accuracy on higher capacitors (e.g. 100n and up, which have not good Q - paper, and some plastic). |
Thanx for replay.
So, what kind of coil do you recomend?
Saulius
|
|
| Back to top |
|
 |
phongwiroon
Joined: 08 Dec 2003 Posts: 32
|
08 Dec 2003 1:53 lc meter schema |
|
|
|
|
here www.electronics-tutorials.com
is another lc meter
|
|
| Back to top |
|
 |
SphinX
Joined: 25 Jan 2002 Posts: 1069 Helped: 28 Location: EGYPT
|
21 Dec 2003 16:09 lc-meter.asm |
|
|
|
|
Hi,
In the next EPE feb 2004 issue.
You will find a project for LCF Meter using PIC16F628
This meter measure
L 1uH 10H
C 1pF 6500uF
F 0.05HZ 5MHZ
The design depends on the NAND CMOS gates to construct the oscillator.
Bye
|
|
| Back to top |
|
 |
mgajo
Joined: 15 May 2001 Posts: 347
|
26 Dec 2003 21:39 lc meter atmega |
|
|
|
|
http://www.spettel.de/ralf/projekte/lc-meter/index.html
LC meter with pic for 38$
|
|
| Back to top |
|
 |
glenjoy
Joined: 01 Jan 2004 Posts: 1028 Helped: 47 Location: Philippines
|
02 Jan 2004 15:40 lm311 oscillator |
|
|
|
|
Can discuss here the accuracy of readings? Thanks.
|
|
| Back to top |
|
 |
glenjoy
Joined: 01 Jan 2004 Posts: 1028 Helped: 47 Location: Philippines
|
03 Jan 2004 15:07 lc meter scheme |
|
|
|
|
| cipo wrote: |
Hi!
Here is another link with full description: http://www.hw.cz/constrc/lc_metr/
Cipo |
Are there any comments in this design?
|
|
| Back to top |
|
 |
hadihf
Joined: 29 Mar 2002 Posts: 136 Location: Planet Earth
|
05 Jan 2004 6:35 lc-meter pic16f84 |
|
|
|
|
Hi,
Here is PCB in PDF to scale...just print
|
|
| Back to top |
|
 |
tanveerriaz
Joined: 14 May 2001 Posts: 271 Helped: 6 Location: Pakistan
|
05 Jan 2004 11:11 lc meter with avr |
|
|
|
|
hare is fc and lc meter but i can not found bin/hex file for 2051
h t t p ://w w w.zajic.cz/menucitac/menucitac.htm
|
|
| Back to top |
|
 |
Borber
Joined: 01 Jan 1970 Posts: 1561 Helped: 117 Location: Slovenia
|
05 Jan 2004 14:37 lc meter source in c |
|
|
|
|
| There is no lc meter but a lot of frequency meters and other stuf on this url. Allso, all items that guy Milos Zajic is only selling. This pages are advertisment.
|
|
| Back to top |
|
 |
pool_77
Joined: 08 Aug 2001 Posts: 220
|
11 Jan 2004 13:16 16f84 lc meter |
|
|
|
|
Another source with AVR LC meter incl. asm, pcb.
www.kramara.com/modules.php?name=Downloads&d_op=getit&lid=1
pool_77
|
|
| Back to top |
|
 |
p3k3m3
Joined: 12 Feb 2004 Posts: 3
|
12 Feb 2004 7:31 lc meter asm |
|
|
|
|
Dear sir
I'm going to make such L-meter
I've the circuit but not the source code for 16f877
would you mind share with us the source code?
Thanks
|
|
| Back to top |
|
 |
preda
Joined: 29 Nov 2003 Posts: 47
|
19 Feb 2004 6:31 lc meter, pic |
|
|
|
|
LC Meter with 16f84 zip for all friend
|
|
| Back to top |
|
 |
preda
Joined: 29 Nov 2003 Posts: 47
|
19 Feb 2004 8:33 digital lc meter |
|
|
|
|
LC-Meter2
|
|
| Back to top |
|
 |
preda
Joined: 29 Nov 2003 Posts: 47
|
20 Feb 2004 15:31 lc meter 3310 |
|
|
|
|
LC-METER 3
|
|
| Back to top |
|
 |
oldmp
Joined: 21 Feb 2004 Posts: 37
|
27 Feb 2004 2:16 pic16f628 lc meter |
|
|
|
|
I built the LC meter, form EPE feb 2004 issue. It's a simple circuit, but by the C meter part , you need to modify the value of the 10k 1% resistor.... Simple use a 20k, and compensate it from the software... When I used the 10k resistor, the oscillator wan't to start... The compensation is easy to made. Turn on the circuit, and press the nulling button...
I tested it from 1pF !!! up to 4700uF--->> No problems!
|
|
| Back to top |
|
 |
bbtjacking
Joined: 23 Feb 2004 Posts: 27
|
27 Feb 2004 5:29 lc meter based on pic |
|
|
|
|
Hi tgq,
Do you have the PIC16F628 files for the LC meter? I have 628 and not 622
|
|
| Back to top |
|
 |
Google AdSense

|
27 Feb 2004 5:29 Ads |
|
|
|
|
|
|
| Back to top |
|
 |
Saulius
Joined: 03 Dec 2003 Posts: 10
|
27 Feb 2004 11:58 atmega inductance meter |
|
|
|
|
| glenjoy wrote: |
| cipo wrote: |
Hi!
Here is another link with full description: http://www.hw.cz/constrc/lc_metr/
Cipo |
Are there any comments in this design? |
I built this. It measure from 0,1 pF to ~3 uF. I used capasitor ~1000 nF and added trimer 5-30 pF. After calibration using capasitor measured on factory meter, I have ~1% accuracy.
Saulius
|
|
| Back to top |
|
 |
tgq
Joined: 15 Jul 2002 Posts: 305 Helped: 2
|
31 Aug 2004 9:05 pic16f876a and nokia 3310 lcd. |
|
|
|
|
Hi all LCM users
Anyone has original AADE's PCB in gif or pdf ?
I have little time to build it and reassemble it for usual 18 pin PIC like 16F628
Thanks
|
|
| Back to top |
|
 |
hadihf
Joined: 29 Mar 2002 Posts: 136 Location: Planet Earth
|
31 Aug 2004 16:05 at89c2051 lc meter |
|
|
|
|
Hi,
Attached is the single sided PCB...I have used two sided with same results..
Regards
|
|
| Back to top |
|
 |
tgq
Joined: 15 Jul 2002 Posts: 305 Helped: 2
|
03 Sep 2004 9:13 lc meter rs232 |
|
|
|
|
| megamicro wrote: |
3. lcm_877.asm - my changes of the first 16 operators for initialisation
of the registers.
|
hi Megamicro
i dont understant what you do when you initialize 16F877 like this (in bank1) :
MOVWF ADCCON1 & 0x7F
...
MOVWF TRISB & 0x7F
...
MOVWF TRISA & 0x7F
...
MOVWF OPTION_REG & 0x7F
Why all these & 0x7F ???
|
|
| Back to top |
|
 |
parab_shashank
Joined: 21 Sep 2004 Posts: 7
|
21 Sep 2004 15:25 lc meter nokia |
|
|
|
|
Hi !
I've made the LC meter using 89c2051 from Hw.cz Site
But it's not working properly
if anybody have made it successfully , kindly provide me the info
Does it measure Capacitance as well as inductance accurately ?
regards,
Shashank P.
|
|
| Back to top |
|
 |
hadihf
Joined: 29 Mar 2002 Posts: 136 Location: Planet Earth
|
24 Sep 2004 9:29 lc meter schematic |
|
|
|
|
| parab_shashank wrote: |
Hi !
I've made the LC meter using 89c2051 from Hw.cz Site
But it's not working properly
if anybody have made it successfully , kindly provide me the info
Does it measure Capacitance as well as inductance accurately ?
regards,
Shashank P. |
Please describle your problem
|
|
| Back to top |
|
 |
vlad5
Joined: 16 Sep 2004 Posts: 10
|
27 Sep 2004 10:22 digital lc meter version 2 con 628.html |
|
|
|
|
Hi!
This links in LC-meter's:
http://www.cqham.ru/lc_meter.phtml
http://www.cqham.ru/lcmeter2.htm
http://www.cqham.ru/lcmeter3.htm
http://www.cqham.ru/ra4nal_lcmeter.htm
Sorry, only russian.
For link 1 - LC_meter.zip - pcb and HEX include.
For link 3 - FCL_prog.zip - ASM and HEX.
|
|
| Back to top |
|
 |
nikifena
Joined: 11 Dec 2003 Posts: 115 Helped: 8 Location: Bulgaria
|
|
| Back to top |
|
 |
BOHDA
Joined: 08 Oct 2004 Posts: 16
|
08 Oct 2004 23:23 fcl meter |
|
|
|
|
Hello
One of the best LC meter I had seen on the net[as precision] is from Russia.On this page is placed as www.cqham.ru/lcmeter3.htm .To understand the text must go to www.translate.ru/eng/ .They have free on line translator for web pages.The only things that are to be made-select "translate WWW',select "translate Russian to English' and finally to introduce the above adress[www.cqham.ru/lcmeter3.htm ].There is an limitation-the translated page cannot be saved!Now a version of Hex file for Pic16F628[as substitute for Pic16f84] is available at http://Andylab.narod.ru.
|
|
| Back to top |
|
 |
pool_77
Joined: 08 Aug 2001 Posts: 220
|
11 Oct 2004 19:20 lc pic meter |
|
|
|
|
but there are described some problem is discussin.
How does it really work?
pool_77
|
|
| Back to top |
|
 |
vfone
Joined: 10 Oct 2001 Posts: 2328 Helped: 327
|
11 Oct 2004 21:20 pic based lc meter |
|
|
|
|
This LC-meter is based on AADE LC-meter:
http://www.aade.com/lcm2binst/LC2Binst.htm
On the net are a lot of variants of this meter using different microcontrollers:
http://www.hw.cz/constrc/lc_metr/
http://ironbark.bendigo.latrobe.edu.au/~rice/lc/
|
|
| Back to top |
|
 |