| Author |
Message |
xeon89
Joined: 03 Nov 2009
Posts: 2
|
 03 Nov 2009 15:51 designing a 0.5W audio amplifier using TDA7052A |
|
|
|
|
| Hi, can anyone tell me how to design a 0.5W audio amplifier with mute and volume control? The design should allow user to switch between different bandwidth and also light up specific LED when different bandwidth is selected. Thanks..=)
|
|
| Back to top |
|
 |
Google
AdSense
|
03 Nov 2009 15:51 Ads |
|
|
|
|
|
|
| Back to top |
|
|
Audioguru
Joined: 19 Jan 2008
Posts: 1149
Helped: 95
Location: Toronto area of Canada
|
03 Nov 2009 22:16 designing a 0.5W audio amplifier using TDA7052A |
|
|
|
|
| I answered your same questions on the other website and I will not repeat them here.
|
|
| Back to top |
|
|
xeon89
Joined: 03 Nov 2009
Posts: 2
|
04 Nov 2009 7:10 Re: designing a 0.5W audio amplifier using TDA7052A |
|
|
|
|
To audioguru:
the project require a preamp stage that amplified the signal and then it will switch by using a transistor(which i am not sure how it is done), the switching will switch to either a normal music bandwidth stage name as music or it can be switch to a bandpass filter which has a freq of 300-3300 Hz name as voice... and then after this it will then be amplified using TDA7052A with volume and mute control.. when music stage is turn on LED red will light up, when voice stage is turn on LED yellow will light up and when mute is on LED green will light up.
i am not sure on which preamp i need to use and how to use a transistor as a switch, components such as uA741, 2N2222, toggle switch.. etc are given. thanks..=)
|
|
| Back to top |
|
|
