Help in Microwave Office (MWO) - adaptation of antenna

EDAboard.com Forum Index -> Electromagnetic Design and Simulation -> Help in Microwave Office (MWO) - adaptation of antenna

Author

Message

cuongtran

Joined: 06 Feb 2007
Posts: 182
Helped: 4
Location: WhiteHouse

03 Nov 2009 13:51 Help in Microwave Office (MWO) - adaptation of antenna

Hi all,

If anyone work with MWO please help me to find out the adaptation of the antenna array below, by MWO, ( in f=0-70GHz), I can not find the good circuit in MWO neither good adaptation of array, so I need your help, thanks very much,

You can use the substrate which has eps=2.5, h=0.8mm, conductor is Cu.

Please upload here your MWO file created the equivalent circuit, thank you very much !!!!

ps- we excite the port 50 Ohm at the head of stripline.

Last edited by cuongtran on 05 Nov 2009 12:06; edited 1 time in total

cuongtran

Joined: 06 Feb 2007
Posts: 182
Helped: 4
Location: WhiteHouse

03 Nov 2009 14:50 Help in Microwave Office (MWO) - adaptation of antenna

I give 100 pnts for the good help, tks.

Manjunatha_hv

Joined: 03 Aug 2005
Posts: 716
Helped: 105
Location: INDIA

04 Nov 2009 14:36 Re: Help in Microwave Office (MWO) - adaptation of antenna

Hello,

Find attached is the MWO project file of the requested antenna using EMSight simulations & Circuit Schematic model...

---manju---

Google
AdSense
Google Adsense

04 Nov 2009 14:36 Ads

Sorry, but you need login in to view this attachment

cuongtran

Joined: 06 Feb 2007
Posts: 182
Helped: 4
Location: WhiteHouse

05 Nov 2009 11:04 Help in Microwave Office (MWO) - adaptation of antenna

Manjunatha,

Thank you very much, i appréciate your post, but may you help me to save the file in the version 7.05 plz; my version is awr7.05 so it cannot open your file, thanks.

ps- what MWO'version you have? thanks