| Author |
Message |
amila133
Joined: 13 Oct 2009
Posts: 28
Location: Sri Lanka
|
 01 Nov 2009 8:43 Sony Ericsson DCU11 to DRC11 |
|
|
|
|
Hi,
I wanted to interface sony ericsson k700 phone to PIC using DRC11
(RS232) cable. But I was unable to find DRC11 cable in the market.
I have DCU11(USB) cable. I have schematic of DRC11 cable But not DCU11 cable. If you have some detail about DCU11 cable, please tell me and guide me to do this clearly.
Thanks............
|
|
| Back to top |
|
 |
Google
AdSense
|
01 Nov 2009 8:43 Ads |
|
|
|
|
|
|
| Back to top |
|
|
fatalday
Joined: 11 Nov 2009
Posts: 1
Location: mx
|
11 Nov 2009 2:46 Sony Ericsson DCU11 to DRC11 |
|
|
|
|
according to the schemmatics that i found in thiss page
http://www.clubsonyericsson.com/foro/index.php?topic=23626.0
the #6 pin is RxD
the #7 pin is TxD
#9 + 3.3 v
#10 GND
for the rs232 connection i hope it works for you
|
|
| Back to top |
|
|
amila133
Joined: 13 Oct 2009
Posts: 28
Location: Sri Lanka
|
12 Nov 2009 8:47 Re: Sony Ericsson DCU11 to DRC11 |
|
|
|
|
Thank you very much
What is the function of DCU11 cable . Is is USB to serial conversion
|
|
| Back to top |
|
|
fiolin
Joined: 22 Jul 2009
Posts: 27
Location: Uruguay
|
12 Nov 2009 16:05 Re: Sony Ericsson DCU11 to DRC11 |
|
|
|
|
Hi Amila, in my case I bought a DCU-11 cable I removed the usb to serial converter and only I used the mobile connector.
About phone connecor I've used pin 4 (Rx), pin 5 (Tx), pin 10(GND), and pin 11 (power)
|
|
| Back to top |
|
|
