| Author |
Message |
impet14
Joined: 11 Jul 2009
Posts: 2
|
 29 Oct 2009 17:26 how to load bootloader to at91sam9260? |
|
|
|
|
I've had Olimex board.and I need to know how to load bootloader by sam-ba program from atmel web.
thanks in advance.
|
|
| Back to top |
|
 |
bobcat1
Joined: 10 Jul 2002
Posts: 1118
Helped: 48
|
31 Oct 2009 13:28 Re: how to load bootloader to at91sam9260? |
|
|
|
|
Hi
You need to compile the bootloader code and produce a HEX or BIN programming file
And program the file using an external programmer or a JTAG programmer or directly from your compiler debugger (depend of type used)
All the best
Bobi
The microcontroller specialist
|
|
| Back to top |
|
|
Google
AdSense
|
31 Oct 2009 13:28 Ads |
|
|
|
|
|
|
| Back to top |
|
|
mapleft
Joined: 23 Oct 2008
Posts: 6
|
02 Nov 2009 4:18 how to load bootloader to at91sam9260? |
|
|
|
|
plug a usb cable to Olimex board,
pu will detecting your board, (installed driver)
run samba
load bin file to you board
|
|
| Back to top |
|
|
eagleone
Joined: 09 Oct 2009
Posts: 10
|
02 Nov 2009 8:10 Re: how to load bootloader to at91sam9260? |
|
|
|
|
| You can go to www.keil.com to download the RealView MDK, it is integrated µVision IDE, debugger and simulation environment, etc. After intalling this software in your PC, you can use it to compile your programs, then download the compiled code to the board by using a JTAG Emulator.
|
|
| Back to top |
|
|
