electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

ads limitations needed to simulate slotline at high freq
Post new topic  Reply to topic    EDAboard.com Forum Index -> Electromagnetic Design and Simulation -> ads limitations needed to simulate slotline at high freq
Author Message
armsgroup



Joined: 27 Feb 2003
Posts: 153
Helped: 8
Post21 Oct 2009 11:11   

ads limitations
hi all
any one know real limitations for ADS momentum , I'm simulating very narrow slotline at high frequency with very thin film
here the parameters :
substrate1: 500um
substrate2(thin film): 1.5 um
slotwidth :10um
slot length : 5 mm
frequency 30GHz

i have completely wrong results , i don't know what is wrong is that because of ADS momentum limitations ???? and if yes please suggest to me how i can simulate this slotline
thanks
Amr
Back to top
Google
AdSense
Google Adsense
Post21 Oct 2009 11:11   

Ads


Back to top
kspalla



Joined: 19 Aug 2008
Posts: 848
Helped: 140
Post05 Nov 2009 11:35   

ads limitations
Please share the design with us to find the wrong
Back to top
alexneverhurts



Joined: 02 Jun 2009
Posts: 15
Post06 Nov 2009 6:43   

Re: ads limitations
From the given parameters, I can't see much oddity. Yet I'm also new to ADS. All I know is that I have simulated structures with 3um minimum dimension and 1mm maximum dimension, 20nm minimum dielectric layer, and 0.2um metal thickness, and the result seems to be correct.
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> Electromagnetic Design and Simulation -> ads limitations needed to simulate slotline at high freq
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
simulate cpw or slotline in feko (1)
generate high freq. clock from a low freq. crystal (4)
High Freq signal measuring with low freq ossiliscope (1)
[Modified]Is there "slotline" symbol in ADS(Advanc (1)
Is there "slotline" symbol in ADS? (1)
How to simulate gm vs freq in LC VCO (4)
High Freq PLL IC ?? (12)
high freq design (1)
R,C,L under High Freq (5)
high freq receiver (2)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS