electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

How to convert Humid sensor output from F to V?
Post new topic  Reply to topic    EDAboard.com Forum Index -> Robotics and Automatics Forum -> How to convert Humid sensor output from F to V?
Author Message
alberteerj



Joined: 21 Oct 2009
Posts: 1
Location: malaysia
Post21 Oct 2009 8:38   

How to convert Humid sensor output from F to V?
i'm currently developing a humidity sensing for my board.
I'm using a Humidity Resistance CHR-O1 sensor from Cybersen product. As mentioned in the datasheet, the sensor uses AC 1V (50 ~ 2 K Hz) supply.
I'm using a 555 timer to generate the pulses and the expected output will be in frequency. But i need to output the signal into ADC board that is using a Vref 4.2V.
I notice someone have suggested using a 2917 or two 555.
If using two 555, one is in Monostable and the other is Astable mode. how do i connect the circuit between two 555? Which type of modulation i should use?
Back to top
Google
AdSense
Google Adsense
Post21 Oct 2009 8:38   

Ads




Sorry, but you need login in to view this attachment
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> Robotics and Automatics Forum -> How to convert Humid sensor output from F to V?
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
How I get 24 bit RGB from 8 bit output from Image sensor (6)
Digital output from sensor (5)
how to convert 5v input to 12v output ?! (14)
How to convert a DC output of 9v 800mAh to 3.6v 600mAh (1)
how can i convert 4-20mA input to digital output by using 10 (14)
how the charge pump output current convert to voltage? (2)
Sensor output --- voltage output or 4-20mA output is better? (13)
how to read the output of PIR sensor (3)
how to use the pic16f877 to detect pwm output sensor to pic (1)
How to convert from gerber to postscript? (7)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS