CAN interfacing with microcontroller

EDAboard.com Forum Index -> Professional Hardware and Electronics Design -> CAN interfacing with microcontroller

Author

Message

ash.sahana

Joined: 30 Sep 2009
Posts: 2
Location: Chennai

30 Sep 2009 8:12 CAN interfacing with microcontroller

Dear friend,

I want to know how to interface CAN Controller (MCP2510/MCP2515) interface with PIC microcontroller.

Can you send sample code for CAN interfacing with PIC Microcontroller.

How to interface sensors and different devices interfacing with CAN Controller

What is output for that CAN Interfacing

How to data transfer happening

Thank you.

mandar_mahajan

Joined: 08 Jul 2009
Posts: 97
Helped: 1
Location: mumbai

30 Sep 2009 8:46 Re: CAN interfacing with microcontroller

I have interfaced CAN with 8051 & is working fine.
First refer the datasheet of both the IC's. It has it's long list of SFR's which needed to be used as per the appl'n.

the data/signal is taken from txd & rxd of 2551..

I HAVE ATTACH THE INTERFACING DIA. OF BOTH THE IC'S WITH EACH OTHER.

HOPE THIS WILL HELP U!!!!

Sorry, but you need login in to view this attachment

karthick.ph

Joined: 30 Oct 2009
Posts: 2
Location: chennai

30 Oct 2009 9:04 Re: CAN interfacing with microcontroller

Hi guys, I'm stuck in doing CAN project. like How to interface the PIC18f4480 with LCD(2 lines 5*7pixcel) device through CAN bus. controller is inbuilt with CAN controller (MCP2510)...& transceiver will interface..how to connect CAN_H & CAN_L pins with LCD.. let me know...

project is Ultrasonic Tx&Rx will give the object distance it will be transferred to controller & through CAN will receive the data and send it to LCD...

any one have an idea about this one. give me any ref. source code.