| Author |
Message |
nmarkovic
Joined: 29 Sep 2009
Posts: 3
Location: Serbia
|
 29 Sep 2009 11:33 Connection between the OMRON PLC and touch screen |
|
|
|
|
I have OMRON PLC CJ1M-CPU21 and OMRON NS8-TV01-V2 touch screen.
Attempts to gain a connection between them, but I fail, I ask for help. Thank you.
|
|
| Back to top |
|
 |
PLCMentor.com
Joined: 26 Mar 2009
Posts: 23
Location: North Carolina, USA
|
29 Sep 2009 21:35 Connection between the OMRON PLC and touch screen |
|
|
|
|
| What kind of communication method are you attempting?
|
|
| Back to top |
|
|
nmarkovic
Joined: 29 Sep 2009
Posts: 3
Location: Serbia
|
30 Sep 2009 10:52 Re: Connection between the OMRON PLC and touch screen |
|
|
|
|
I want to connect via RS-232 cable, I have RS-232 cables, but nothing happens when I connect them. Cable is good, checked.
Do I need to set some parameters in the PLC or the touch screen, and where I can set them?
|
|
| Back to top |
|
|
Google
AdSense
|
30 Sep 2009 10:52 Ads |
|
|
|
|
|
|
| Back to top |
|
|
PLCMentor.com
Joined: 26 Mar 2009
Posts: 23
Location: North Carolina, USA
|
30 Sep 2009 15:05 Connection between the OMRON PLC and touch screen |
|
|
|
|
| Ok, yes you will need to setup the communication parameters in the PLC and HMI. I do not have the software here so I cant really lead you through the configuration. You might check the mrplc forum. Someone there will probably be able to lead you through the setup. Just put as much info in the post as you can provide. Also check the manuals first to see if there is a walk through there. I notice that the HMI has two ports so make sure you plug into the port you setup. Also - you say you know the cables are good. Are they factory cables or something else? I guess I am asking are you sure the cables are good for your system?
|
|
| Back to top |
|
|
nmarkovic
Joined: 29 Sep 2009
Posts: 3
Location: Serbia
|
30 Sep 2009 15:43 Re: Connection between the OMRON PLC and touch screen |
|
|
|
|
| OK, thanks. I don't have a factory cables, I made a cables through the schema and the instructions that I found on the Internet. And yes a plug the cable into right port.
|
|
| Back to top |
|
|
