electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

Burnt Resistor value required for AL1713 LCD Monitor
Post new topic  Reply to topic    EDAboard.com Forum Index -> Service Manuals, Requests, Repair Tips -> Burnt Resistor value required for AL1713 LCD Monitor
Author Message
swarupgoutam



Joined: 12 Sep 2009
Posts: 5
Location: Bangalore
Post12 Sep 2009 8:39   

al1713 r1
Resistor Location R1 in the inverter section.
Back to top
Google
AdSense
Google Adsense
Post12 Sep 2009 8:39   

Ads


Back to top
walter58



Joined: 01 Nov 2009
Posts: 2
Helped: 1
Location: Ekeren-Antwerp Belgium
Post01 Nov 2009 17:13   

Re: Burnt Resistor value required for AL1713 LCD Monitor
Maybe I am too late with my answer, but I post it anyway.

The value of the burnt resistor R1 in the Powerboard/invertor board =

R1 = 10 ohm / 1/4 watt, but I would suggest to replace it with a resistor :

10 ohm / 1/2 watt since it is in the +5 volt line and the current may be a bit too high for a simple 1/4 watt resistor.

I will attach the service manual of this Acer monitor AL1713 to this message.

success

Sorry, but you need login in to view this attachment
Back to top
walter58



Joined: 01 Nov 2009
Posts: 2
Helped: 1
Location: Ekeren-Antwerp Belgium
Post01 Nov 2009 17:15   

Re: Burnt Resistor value required for AL1713 LCD Monitor
Maybe I am too late with my answer, but I post it anyway.

The value of the burnt resistor R1 in the Powerboard/invertor board =

R1 = 10 ohm / 1/4 watt, but I would suggest to replace it with a resistor :

10 ohm / 1/2 watt since it is in the +5 volt line and the current may be a bit too high for a simple 1/4 watt resistor.

I will attach the service manual of this Acer monitor AL1713 to this message.

success

Sorry, but you need login in to view this attachment
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> Service Manuals, Requests, Repair Tips -> Burnt Resistor value required for AL1713 LCD Monitor
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
Pull-up resistor value for I2C (10)
How to choose a resistor mismatch value for a DAC? (2)
Problem with my Lcd Monitor for PC: Hyundai X90W (1)
Repair Help for an Acer AL1916W LCD Monitor (1)
HELP: Looking for Acer LCD monitor AL1914 bm Schematic (4)
Need service manual for Acer AL1715mb LCD monitor (1)
The Best value for the Resistor (1)
Resistor value variation (6)
Choice of resistor value (3)
Weller WS 50 resistor value (1)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS