electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

orcad 16.2 the length of the trace from a pin to another pin
Post new topic  Reply to topic    EDAboard.com Forum Index -> PCB Routing & Schematic Layout software & Simulation -> orcad 16.2 the length of the trace from a pin to another pin
Author Message
jasmi



Joined: 27 Aug 2009
Posts: 1
Location: finland
Post27 Aug 2009 11:54   

pbc track length
hi..
i'm very new to orcad 16.2,
how can i know the length of the trace from a pin to another pin.

thanks
Back to top
dmd4raj



Joined: 23 Jun 2008
Posts: 45
Helped: 1
Post28 Aug 2009 5:42   

Re: pbc track length
You can see 3 tabs in the right Side of the Window as Find,options,Visibility....
Go to Find Select the Net option...Now select the net u want the length...this ll show the length...

Regards
Rajan
Back to top
Google
AdSense
Google Adsense
Post28 Aug 2009 5:42   

Ads


Back to top
chakravarthy80pcb



Joined: 08 Jul 2009
Posts: 52
Helped: 7
Location: chennai
Post29 Aug 2009 6:32   

pbc track length
Go to Display->Elememt and then select only clines from Find filter option and then click on the net you will get a pop menu mentioning PIN to PIN length.

hope this will help you

cheers,
chakri
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> PCB Routing & Schematic Layout software & Simulation -> orcad 16.2 the length of the trace from a pin to another pin
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
OrCAD Capture Pin Names / Pin Numbers Help (1)
can we copy the CLOCK SIGNAL from fpga pin to LEDS on fpga?? (2)
Can I use the floorplan file to determine the pin location ? (3)
help ,who knows the pin definition of the LBN SU1278/LH-2 (1)
wat is the status of the pin (2)
Soldering tiny SMD with pin to pin spacing of 0.65mm (7)
Can scan_test_mode pin share with other pin? (3)
RGB signal to 15-pin and 9-pin D-Sub connector (8)
ESD at the SW pin (3)
how to use a gclk pin as a output pin (2)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS