Rules | Recent posts | topic RSS | Search | Register  | Log in

why my co-simulation show error in ADS?


Post new topic  Reply to topic    EDAboard.com Forum Index -> RF, Microwave, Antennas and Optics -> why my co-simulation show error in ADS?
Author Message
TerryADS



Joined: 31 Oct 2008
Posts: 116
Location: USA


Post02 Jul 2009 21:03   

why my co-simulation show error in ADS?


Hi friends,
I want to co-simulate power divider when i create layout component,it shows error.Anyone can help me?
why my co-simulation show error in ADS?



Sorry, but you need login in to view this attachment

Back to top
kayaoo



Joined: 02 Sep 2003
Posts: 31
Helped: 2


Post03 Jul 2009 7:42   

Re: why my co-simulation show error in ADS?


Your file name(k=1_splitter_optimization_complete_1) for the layout is not a good one. Change to a short one such as "k111" should then be ok.
Back to top
TerryADS



Joined: 31 Oct 2008
Posts: 116
Location: USA


Post03 Jul 2009 15:41   

why my co-simulation show error in ADS?


Thanks,Kayaoo.As your mention,i fixed it.But one case show as following when i ran momentum.
why my co-simulation show error in ADS?
How i can solve it?
Back to top
kayaoo



Joined: 02 Sep 2003
Posts: 31
Helped: 2


Post04 Jul 2009 5:38   

Re: why my co-simulation show error in ADS?


I have no idea as my ADS2005 does not report such a warning. However I don't think it will be a problem if you do not use "reference offset".
Back to top
Google
AdSense
Google Adsense




Post04 Jul 2009 5:38   

Ads




Back to top
TerryADS



Joined: 31 Oct 2008
Posts: 116
Location: USA


Post05 Jul 2009 11:21   

why my co-simulation show error in ADS?


Oh...is it nothing with getting an accurate result if not use the "reference offset".?
Back to top
kspalla



Joined: 19 Aug 2008
Posts: 811
Helped: 126


Post06 Jul 2009 13:55   

why my co-simulation show error in ADS?


Try with enabling thick conductor i.e under mesh control enable the horizontal currents.
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> RF, Microwave, Antennas and Optics -> why my co-simulation show error in ADS?
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
Why indicate error in running co-simulation in ADS? (2)
error in co-simulation in ADS soft (11)
why ref terminal of layout disappear co-simulaton in ADS? (3)
How to make co-simulation optimization effictively in ADS? (6)
ADS Co-Simulation! (2)
why simulation don't show the noise from bias circuits? (5)
what's the error in my vhdl code?why so much latch? (8)
Why my S21 is different in momentum simulation? (8)
Need help about ADS Co-simulation problem? (5)
why the slope is different in my bandgap simulation (1)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS