siemens gsm/gprs

EDAboard.com Forum Index -> Microcontrollers -> siemens gsm/gprs

Author

Message

tongbram

Joined: 09 Dec 2008
Posts: 6

18 May 2009 5:43 at^siso? siemens

i m confuse where to post this question.....well i m trying to do a project in which i continuously sending data to the internet using gprs after particular time interval say 1 or 2 minute. And whenever message or ring comes it should stop/close the internet connection and handle these msg/ring and then return to the online data transferring mode.please can anybody help me on this topic........ i m using Siemens mc55 module.

shirsanka

Joined: 01 Sep 2008
Posts: 7

22 May 2009 12:23 at^sics mc55

tongbram wrote:

Your requirement is very simple. The internet connection and Voice/SMS both are work in same time. There are no problem in MC55 module. If not want to use parallel, in that case u can stop the internet connection.First tell me, in which protocol u r sending the data to a server?

Google
AdSense
Google Adsense

22 May 2009 12:23 Ads

tongbram

Joined: 09 Dec 2008
Posts: 6

24 May 2009 6:23 at gprs siso siss

thanks for the reply,.......i m using the socket type of connection. here i can call as well as receives sms but in this type of socket connection i have to disconnect the gprs and then i have to connect the gprs for sending data again....i dont know why it is required. These are the AT commands

AT^SICS=0,CONTTYPE,GPRS0
AT^SICS=0,APN,"airtelgprs.com"
AT^SISS=9,SRVTYPE,SOCKET
AT^SISS=9,CONID,0
AT^SISS=9,ADDRESS,"SOCKTCP://www.gpsgate.com:35"
AT^SISO=9
AT^SISW=9,(no. of byte to send),1

you can suggest me any other connection in which i can send data without disconnecting the gprs or what modification require in above AT commands???????