amitdegada
Joined: 08 Nov 2008
Posts: 53
Helped: 4
Location: Surat, India.
|
 12 May 2009 7:57 Re: What is the best line code? |
|
|
|
|
A digital signal is a discontinuous signal that changes from one state to another in discrete steps. A popular form of digital modulation is binary, or two level, digital modulation. In binary modulation the optical signal is switched from a low-power level (usually off) to a high-power level.
Line coding is the process of arranging symbols that represent binary data in a particular pattern for transmission.
The most common types of line coding used in fiber optic communications include non-return-to-zero (NRZ), return-to-zero (RZ), and biphase, or Manchester.
NRZ code represents binary 1s and 0s by two different light levels that are constant during a bit duration. The presence of a high-light level in the bit duration represents a binary 1, while a low-light level represents a binary 0. NRZ codes make the most efficient use of system bandwidth. However, loss of timing may result if long strings of 1s and 0s are present causing a lack of level transitions. RZ coding uses only half the bit duration for data transmission.
In RZ encoding, a half period optical pulse present in the first half of the bit duration represents a binary 1. While an optical pulse is present in the first half of the bit duration, the light level returns to zero during the second half. A binary 0 is represented by the absence of an optical pulse during the entire bit duration. Because RZ coding uses only half the bit duration for data transmission, it requires twice the bandwidth of NRZ coding. Loss of timing can occur if long strings of 0s are present.
Biphase, or Manchester, encoding incorporates a transition into each bit period to maintain timing information. In Manchester encoding, a high-to-low light level transition occurring in the middle of the bit duration represents a binary 1. A low-to-high light level transition occurring in the middle of the bit duration represents a binary 0.
|
|
