electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

what value does the solution frequency I need to setup?
Post new topic  Reply to topic    EDAboard.com Forum Index -> RF, Microwave, Antennas and Optics -> what value does the solution frequency I need to setup?
Author Message
davison7



Joined: 30 Aug 2008
Posts: 19
Helped: 1
Post09 Apr 2009 14:12   

what value does the solution frequency I need to setup?
Hi,everybody

I design a dual-band antenna with the HFSS software. The antenna is designed for the GSM system and has the operation frequency of 900 MHz and 1.8 GHz, respectively. But the HFSS simulator has a "solution frequency" option for the computing functions. So what value does the solution frequency I need to setup for getting the accurate simulation?
Back to top
Google
AdSense
Google Adsense
Post09 Apr 2009 14:12   

Ads


Back to top
weiweia



Joined: 01 Mar 2006
Posts: 11
Post09 Apr 2009 16:41   

what value does the solution frequency I need to setup?
Hi,

Try to add another solution setup, and so you can set two solution frequency as 900MHz and 1.8GHz.
The extra effort you have to make is two frequency sweep.

Best Regards.
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> RF, Microwave, Antennas and Optics -> what value does the solution frequency I need to setup?
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
What does the value of speed grade mean ? (4)
What does negative setup and hold values mean? (3)
what is the meaning of (max.value-min.value)/2 (9)
Why does the voltmeter measure the rms value of voltage? (2)
Why does the voltmeter measure the rms value of voltage? (1)
What does normalized frequency mean? (4)
What frequency does a Decoupling CAP work on? (2)
What does DC to 6000MHz operational Frequency mean (4)
Oscillator frequency range = DC to 100 kHz. What does DC ? (5)
What is effect of the capacitor value on the output of the p (1)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS