electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

Wireless notice board help


Post new topic  Reply to topic    EDAboard.com Forum Index -> Embedded Systems and Real-Time OS -> Wireless notice board help
Author Message
sujayjp700



Joined: 19 Feb 2009
Posts: 1


Post19 Feb 2009 19:28   

wireless notice board


hi all,
i am doing a project on wireless notice board using two PIC16f877s,one interfaced to a PC and transmitter and the other to a receiver with a LCD module.
to increase the range i have thought of involving a GSM kit so that using SMS i can display the data reqd on the notice board. the problem is i dont know a thing about the GSM kit nor how to interface it to the controller. if anyone can come up with some suggestion and schematics it would be deeply appreciated. thank you.
Back to top
Google
AdSense
Google Adsense




Post19 Feb 2009 19:28   

Ads




Back to top
soumenlaha



Joined: 24 Nov 2008
Posts: 2


Post31 Mar 2009 7:39   

wireless notice board


U need 2 GSM modems.What i suggest u is u make a GUI application to send the message from the pc and GSM modem no extra circuitry.

And at the receiver side u just read the sms and display that into display.

will u please provide the schematic & code which u made without GSM
Back to top
sanddune008



Joined: 28 Aug 2008
Posts: 11
Helped: 1


Post02 Apr 2009 7:26   

wireless notice board projects


1. What is the range u needed? What is the size of data exchanges?
2. Expecting Data rate?
3. GSM uses licensed band.
4. Have you thought about the cost?

Why don't you try other wireless options?

best wishes
Back to top
sau_sol



Joined: 27 Feb 2008
Posts: 249
Helped: 27
Location: India


Post09 Apr 2009 10:42   

notice board display gsm kit


There are other wireless chips from analog semiconductor and cyprus
they can provide more than 20m of range easily

but you can use high range RF transceivers with amplifiers and a good antenna to increase the range
and give more current to the wireless kit ( under the range specified ) to increase the range
But if you want to go for GSM you can get ready made kits in market but the problem is to configure it
Back to top
pramodm



Joined: 29 May 2007
Posts: 58
Helped: 3


Post11 Apr 2009 6:51   

real time applications of wireless notice board


hi,

I am also doing same project
Can u please provide the documents(Schimatic and code ) with you, with or with out GSM module.



thanx
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> Embedded Systems and Real-Time OS -> Wireless notice board help
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
Notice (1)
I take no notice of received sms... (2)
What should I notice designing a PA by CMOS technology (3)
wireless key board ? (3)
Board design - wireless USB (2)
fpga board for wireless remote control??? (2)
evb8051 board--help (1)
Load Board Help (2)
Board design help......... (5)
Help:89c51 development board (1)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS