electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

how to set the adaptive passes and Delta-S for convergence!
Post new topic  Reply to topic    EDAboard.com Forum Index -> Electromagnetic Design and Simulation -> how to set the adaptive passes and Delta-S for convergence!
Author Message
dentai



Joined: 12 Nov 2007
Posts: 23
Post26 Nov 2008 16:03   

how to set the adaptive passes and Delta-S for convergence!
I am simulating an EBG structure. In the simulation, I use 2 kinds of boundary condition. With the first kind, the convergence is ok. But when I use another kind of boundary condition, there is no convergence (with the same settings as the former simulation). (The setting for convergence: number of adaptive pass = 20, delta-s=0.02)
I tried to change the delta-s to 0.01 but nothing changed, solution is not convergent.
Anyone helps me solve this problem.
Thank you.
Back to top
Google
AdSense
Google Adsense
Post26 Nov 2008 16:03   

Ads


Back to top
051120054



Joined: 30 Nov 2008
Posts: 4
Post30 Nov 2008 18:04   

how to set the adaptive passes and Delta-S for convergence!
delta-s 0.01 is harder to be convergent than 0.02.

upload your project will be helpful.
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> Electromagnetic Design and Simulation -> how to set the adaptive passes and Delta-S for convergence!
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
How to set the delta S in HFSS? (1)
HOW TO DESIGN AN ALGORYTHEM FOR AN ADAPTIVE DELTA MODULATION (4)
Adaptive passes did not converge based on specific criteria (2)
How to set up the ground for the lump port in HFSS? (2)
How to set OSR in simulink design of a delta-sigma ADC (3)
how to set the enviroment for hspice? (2)
How to set the RWB and VWB of spectrum analyzar ? (1)
How to set the license for Hspice in Redhat (4)
how can i set the lumped port for ltcc capacitor? (3)
How to set the rise time for a step signal in matlab (1)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS