| Author |
Message |
spectrum70
Joined: 26 Jun 2008
Posts: 2
|
 26 Jun 2008 12:43 Sim300 problem |
|
|
|
Hello all,
i get a sim300_dev board, and i would be able to send some sms.
After startup i get:
RDY
+CPIN: NOT INSERTED
+CFUN: 1
I trying to put a pin, with AT+CPIN i get +CME ERROR: 10
if some help,
thanks
|
|
| Back to top |
|
 |
ds18s20
Joined: 14 Jun 2006
Posts: 144
Helped: 2
Location: Bay Area
|
| 26 Jun 2008 16:37 Re: Sim300 problem |
|
|
|
| spectrum70 wrote: |
Hello all,
i get a sim300_dev board, and i would be able to send some sms.
After startup i get:
RDY
+CPIN: NOT INSERTED
+CFUN: 1
I trying to put a pin, with AT+CPIN i get +CME ERROR: 10
if some help,
thanks |
Where did you get your sim300_dev board from? URL..?
|
|
| Back to top |
|
|
spectrum70
Joined: 26 Jun 2008
Posts: 2
|
| 26 Jun 2008 18:56 Sim300 problem |
|
|
|
ds18s20, i was looking for an answer, not a for a question  The board is not mine, and i will never buy a dev board couse i can do it starting from the module.
Anyway, since i have seen in the forum this and other unanswered questions, i want leave some answers, hope they would be visible on a search.
SIM300 general help
+CPIN: NOT INSERTED
mean that the sim card is not, or probably "not well" inserted. Try to clean the contacts, and keep the card pushed by hand, just for test.
+CPIN: SIM PIN
pin code must be entered, try AT+CPIN=1234
+CMS ERROR: 517 : SM BL NOT READY
sm stay for Sim Phonebook. Anyway this message probably mean that the sim is not well inserted, or that the PIN code in not inserted (try AT+CPIN=1234 )
Receiving bad charachters on the terminal:
This is due to the fact that Sim300 start up as factory default in "autobaud rate". Set it to a fixed speed, for example AT+IPR=115200
The speed will change after the "OK".
greetigns,
spectrum
|
|
| Back to top |
|
|
jul1984
Joined: 04 Sep 2008
Posts: 1
|
| 04 Sep 2008 22:53 Re: Sim300 problem |
|
|
|
I īm using a EVB but for sim508 and i was the same problem. In my case there was a hardware problem, the Evaluation Board come with a short circuit between sim card voltage and ground.
Regardsjavascript:emoticon(' ')
|
|
| Back to top |
|
|
