Rules | Recent posts | topic RSS | Search | Register  | Log in

USB Hi-Speed data tranfer rate

 
Post new topic  Reply to topic    EDAboard.com Forum Index -> PLD, SPLD, GAL, CPLD, FPGA Design
Author Message
simce



Joined: 09 Jan 2004
Posts: 194


Post07 Jun 2008 21:44   USB Hi-Speed data tranfer rate

Hi,
Can anyone please tell me what is the maximum data transfer rate that can be achieved between PC and SoC using USB?
Any proposals which USB Hi-Speed IP block should be used to achieve highest data throughput between PC and SoC?
Thank you.
Back to top
FvM



Joined: 22 Jan 2008
Posts: 2240
Helped: 374
Location: Bochum, Germany


Post07 Jun 2008 22:03   Re: USB Hi-Speed data tranfer rate

Typically, the USB througput is limited below the theoretical capacity by the PC driver. This should be considered when designing an application that depends on a certain troughput.

It should be more easy to achieve a defined behaviour at the SoC side, particularly with a hardwired FPGA solution.

Cypress has released an application note about USB high speed troughput. Their devices (operated in DMA mode) didn't constrain it. The AN is also discussing the overhead for different transfer block sizes.
Back to top
simce



Joined: 09 Jan 2004
Posts: 194


Post08 Jun 2008 19:53   Re: USB Hi-Speed data tranfer rate

Any hint how to find the AN that you mentioned or even better a link to it?
Thank you.
Back to top
mami_hacky



Joined: 28 Mar 2002
Posts: 678
Helped: 4
Location: Some where


Post09 Jun 2008 9:50   USB Hi-Speed data tranfer rate

Dear Sir
We , as a development team of students, have developed a complete reference design using Cypress SX2 High Speed USB device.

The design uses a Spartan-3 FPGA connected to SX2 in order to control the device and send/receive data

We have published the complete work, along with documentation, source codes and every thing needed to do the task to Circuit Cellar magazine. We hope that they publish the paper soon, after that you can see, how easily you can reach rates above 400MBits/s using USB 2.0 SX2 controller
Back to top
voho



Joined: 24 Feb 2004
Posts: 97


Post18 Jun 2008 14:37   Re: USB Hi-Speed data tranfer rate

hi,

look at http://www.cypress.com/products/?fid=14&rpn=CY7C68013A&ref=sch

regards
Back to top
Post new topic  Reply to topic    EDAboard.com Forum Index -> PLD, SPLD, GAL, CPLD, FPGA Design
Page 1 of 1 All times are GMT + 2 Hours


Abuse
Administrator
Moderators
topic RSS 
sitemap