mpardinho
Joined: 07 Aug 2006
Posts: 10
|
 11 Jun 2008 21:42 Re: PC interface using VB |
|
|
|
trey this code
Serial and Paralell
| Code: |
Option Strict On
' Define a CommException class that inherits from the ApplicationException class.
' Then throw an object of type CommException when you receive an error message.
Class CommException
Inherits ApplicationException
Sub New(ByVal Reason As String)
MyBase.New(Reason)
End Sub
End Class
Module Module1
'Declare structures
Public Structure DCB
Public DCBlength As Int32
Public BaudRate As Int32
Public fBitFields As Int32
Public wReserved As Int16
Public XonLim As Int16
Public XoffLim As Int16
Public ByteSize As Byte
Public Parity As Byte
Public StopBits As Byte
Public XonChar As Byte
Public XoffChar As Byte
Public ErrorChar As Byte
Public EofChar As Byte
Public EvtChar As Byte
Public wReserved1 As Int16 'Reserved; Do Not Use
End Structure
Public Structure COMMTIMEOUTS
Public ReadIntervalTimeout As Int32
Public ReadTotalTimeoutMultiplier As Int32
Public ReadTotalTimeoutConstant As Int32
Public WriteTotalTimeoutMultiplier As Int32
Public WriteTotalTimeoutConstant As Int32
End Structure
'Declare constants.
Public Const GENERIC_READ As Int32 = &H80000000
Public Const GENERIC_WRITE As Int32 = &H40000000
Public Const OPEN_EXISTING As Int32 = 3
Public Const FILE_ATTRIBUTE_NORMAL As Int32 = &H80
Public Const NOPARITY As Int32 = 0
Public Const ONESTOPBIT As Int32 = 0
'Declare references to external functions.
Public Declare Auto Function CreateFile Lib "kernel32.dll" _
(ByVal lpFileName As String, ByVal dwDesiredAccess As Int32, _
ByVal dwShareMode As Int32, ByVal lpSecurityAttributes As IntPtr, _
ByVal dwCreationDisposition As Int32, ByVal dwFlagsAndAttributes As Int32, _
ByVal hTemplateFile As IntPtr) As IntPtr
Public Declare Auto Function GetCommState Lib "kernel32.dll" (ByVal nCid As IntPtr, _
ByRef lpDCB As DCB) As Boolean
Public Declare Auto Function SetCommState Lib "kernel32.dll" (ByVal nCid As IntPtr, _
ByRef lpDCB As DCB) As Boolean
Public Declare Auto Function GetCommTimeouts Lib "kernel32.dll" (ByVal hFile As IntPtr, _
ByRef lpCommTimeouts As COMMTIMEOUTS) As Boolean
Public Declare Auto Function SetCommTimeouts Lib "kernel32.dll" (ByVal hFile As IntPtr, _
ByRef lpCommTimeouts As COMMTIMEOUTS) As Boolean
Public Declare Auto Function WriteFile Lib "kernel32.dll" (ByVal hFile As IntPtr, _
ByVal lpBuffer As Byte(), ByVal nNumberOfBytesToWrite As Int32, _
ByRef lpNumberOfBytesWritten As Int32, ByVal lpOverlapped As IntPtr) As Boolean
Public Declare Auto Function ReadFile Lib "kernel32.dll" (ByVal hFile As IntPtr, _
ByVal lpBuffer As Byte(), ByVal nNumberOfBytesToRead As Int32, _
ByRef lpNumberOfBytesRead As Int32, ByVal lpOverlapped As IntPtr) As Boolean
Public Declare Auto Function CloseHandle Lib "kernel32.dll" (ByVal hObject As IntPtr) As Boolean
Sub Main()
' Declare local variables that you will use in the code.
Dim hSerialPort, hParallelPort As IntPtr
Dim Success As Boolean
Dim MyDCB As DCB
Dim MyCommTimeouts As COMMTIMEOUTS
Dim BytesWritten, BytesRead As Int32
Dim Buffer() As Byte
' Declare variables to use for encoding.
Dim oEncoder As New System.Text.ASCIIEncoding
Dim oEnc As System.Text.Encoding = oEncoder.GetEncoding(1252)
' Convert String to Byte().
Buffer = oEnc.GetBytes("Test")
Try
' Serial port.
Console.WriteLine("Accessing the COM1 serial port")
' Obtain a handle to the COM1 serial port.
hSerialPort = CreateFile("COM1", GENERIC_READ Or GENERIC_WRITE, 0, IntPtr.Zero, _
OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, IntPtr.Zero)
' Verify that the obtained handle is valid.
If hSerialPort.ToInt32 = -1 Then
Throw New CommException("Unable to obtain a handle to the COM1 port")
End If
' Retrieve the current control settings.
Success = GetCommState(hSerialPort, MyDCB)
If Success = False Then
Throw New CommException("Unable to retrieve the current control settings")
End If
' Modify the properties of the retrieved DCB structure as appropriate.
' WARNING: Make sure to modify the properties according to their supported values.
MyDCB.BaudRate = 9600
MyDCB.ByteSize = 8
MyDCB.Parity = NOPARITY
MyDCB.StopBits = ONESTOPBIT
' Reconfigure COM1 based on the properties of the modified DCB structure.
Success = SetCommState(hSerialPort, MyDCB)
If Success = False Then
Throw New CommException("Unable to reconfigure COM1")
End If
' Retrieve the current time-out settings.
Success = GetCommTimeouts(hSerialPort, MyCommTimeouts)
If Success = False Then
Throw New CommException("Unable to retrieve current time-out settings")
End If
' Modify the properties of the retrieved COMMTIMEOUTS structure as appropriate.
' WARNING: Make sure to modify the properties according to their supported values.
MyCommTimeouts.ReadIntervalTimeout = 0
MyCommTimeouts.ReadTotalTimeoutConstant = 0
MyCommTimeouts.ReadTotalTimeoutMultiplier = 0
MyCommTimeouts.WriteTotalTimeoutConstant = 0
MyCommTimeouts.WriteTotalTimeoutMultiplier = 0
' Reconfigure the time-out settings, based on the properties of the modified COMMTIMEOUTS structure.
Success = SetCommTimeouts(hSerialPort, MyCommTimeouts)
If Success = False Then
Throw New CommException("Unable to reconfigure the time-out settings")
End If
' Write data to COM1.
Console.WriteLine("Writing the following data to COM1: Test")
Success = WriteFile(hSerialPort, Buffer, Buffer.Length, BytesWritten, IntPtr.Zero)
If Success = False Then
Throw New CommException("Unable to write to COM1")
End If
' Read data from COM1.
Success = ReadFile(hSerialPort, Buffer, BytesWritten, BytesRead, IntPtr.Zero)
If Success = False Then
Throw New CommException("Unable to read from COM1")
End If
Catch ex As Exception
Console.WriteLine(Ex.Message)
Finally
' Release the handle to COM1.
Success = CloseHandle(hSerialPort)
If Success = False Then
Console.WriteLine("Unable to release handle to COM1")
End If
End Try
Try
' Parallel port.
Console.WriteLine("Accessing the LPT1 parallel port")
' Obtain a handle to the LPT1 parallel port.
hParallelPort = CreateFile("LPT1", GENERIC_READ Or GENERIC_WRITE, 0, IntPtr.Zero, _
OPEN_EXISTING, FILE_ATTRIBUTE_NORMAL, IntPtr.Zero)
' Verify that the obtained handle is valid.
If hParallelPort.ToInt32 = -1 Then
Throw New CommException("Unable to obtain a handle to the LPT1 port")
End If
' Retrieve the current control settings.
Success = GetCommState(hParallelPort, MyDCB)
If Success = False Then
Throw New CommException("Unable to retrieve the current control settings")
End If
' Modify the properties of the retrieved DCB structure as appropriate.
' WARNING: Make sure to modify the properties according to their supported values.
MyDCB.BaudRate = 9600
MyDCB.ByteSize = 8
MyDCB.Parity = NOPARITY
MyDCB.StopBits = ONESTOPBIT
' Reconfigure LPT1 based on the properties of MyDCB.
Success = SetCommState(hParallelPort, MyDCB)
If Success = False Then
Throw New CommException("Unable to reconfigure LPT1")
End If
' Reconfigure LPT1 based on the properties of the modified DCB structure.
Success = GetCommTimeouts(hParallelPort, MyCommTimeouts)
If Success = False Then
Throw New CommException("Unable to retrieve current time-out settings")
End If
' Modify the properties of the retrieved COMMTIMEOUTS structure as appropriate.
' WARNING: Make sure to modify the properties according to their supported values.
MyCommTimeouts.ReadIntervalTimeout = 0
MyCommTimeouts.ReadTotalTimeoutConstant = 0
MyCommTimeouts.ReadTotalTimeoutMultiplier = 0
MyCommTimeouts.WriteTotalTimeoutConstant = 0
MyCommTimeouts.WriteTotalTimeoutMultiplier = 0
' Reconfigure the time-out settings, based on the properties of the modified COMMTIMEOUTS structure.
Success = SetCommTimeouts(hParallelPort, MyCommTimeouts)
If Success = False Then
Throw New CommException("Unable to reconfigure the time-out settings")
End If
' Write data to LPT1.
' Note: You cannot read data from a parallel port by calling the ReadFile function.
Console.WriteLine("Writing the following data to LPT1: Test")
Success = WriteFile(hParallelPort, Buffer, Buffer.Length, BytesWritten, IntPtr.Zero)
If Success = False Then
Throw New CommException("Unable to write to LPT1")
End If
Catch ex As Exception
Console.WriteLine(Ex.Message)
Finally
' Release the handle to LPT1.
Success = CloseHandle(hParallelPort)
If Success = False Then
Console.WriteLine("Unable to release handle to LPT1")
End If
End Try
Console.WriteLine("Press ENTER to quit")
Console.ReadLine()
End Sub
End Module
|
from http://support.microsoft.com/kb/823179
|
|
