| Author |
Message |
ds18s20
Joined: 13 Jun 2006
Posts: 155
Helped: 2
Location: Bay Area
|
 29 Apr 2008 19:37 wmod2 |
|
|
|
|
Hello,
Does anyone have experience with WMOD2A-G1900 WM11725 Wavecom modem?
How does one reset the modem to factory defaults. The reset pin DOES NOT do that. It simply executes power-on reset which is no different than powering OFF and then powering back ON. Unfortunately that procedure does NOT reset the configuration back to factory.
Here is the spec sheet in case someone is curious as to what this module is:
WMOD2-UserGuide.pdf 
Thanks
B
 [/url]
|
|
| Back to top |
|
 |
brmadhukar
Joined: 21 Jun 2002
Posts: 844
Helped: 29
|
05 May 2008 18:07 wavecom wmod2 at commands |
|
|
|
|
I had a similar modem and this was basically reset or reconfigured using the commands in the usermanual. Connect to hyperterminal and execute the commands.
Hope this helps,
Madhukar
|
|
| Back to top |
|
|
ds18s20
Joined: 13 Jun 2006
Posts: 155
Helped: 2
Location: Bay Area
|
05 May 2008 18:16 reset modem wavecom |
|
|
|
|
| brmadhukar wrote: |
I had a similar modem and this was basically reset or reconfigured using the commands in the usermanual. Connect to hyperterminal and execute the commands.
Madhukar |
That is exactly what I CAN NOT do. I dont have access to the serial because some strange config was used and I can not deduce the settings. I get garbage out of the serial no matter how many different baud rates I try.
So the objective is to find a way to do factory reset by other means. If you dont know the answer please dont post BS,
When you call the modem, it is supposed to send RING to its serial interface.
Here is what I can capture:
Thanks
B
|
|
| Back to top |
|
|
Google
AdSense
|
05 May 2008 18:16 Ads |
|
|
|
|
|
|
| Back to top |
|
|
owdk
Joined: 20 May 2009
Posts: 3
Helped: 1
|
01 Nov 2009 9:09 Re: Wavecom GSM modem WMOD2A-G1900 WM11725 series WMOD2 |
|
|
|
|
Did you succeded resetting the modem to default?
I have had some wavecoms modems that I brought back to default by grounding the reset pin (pin14) and sending 'AT' (capital letters) at 9600 baud to it.
After a number of 'AT's the modem responded and I could save a new comfiguration
(but I have one that don't respond to this - I guess due to firmware -, so if there is other way to reset I would like to know).
|
|
| Back to top |
|
|
ds18s20
Joined: 13 Jun 2006
Posts: 155
Helped: 2
Location: Bay Area
|
01 Nov 2009 18:57 Re: Wavecom GSM modem WMOD2A-G1900 WM11725 series WMOD2 |
|
|
|
|
| yes thank you, I figured out the reset and my modem is working just fine, thanks for checking-in
|
|
| Back to top |
|
|
