| Author |
Message |
SteveTearall
Joined: 21 Apr 2008
Posts: 5
|
 21 Apr 2008 16:28 Help needed with TV repair |
|
|
|
|
I have a Panasonic TX-W32D2DP which is EURO3HW chassis. The TV is stuck in Standby. Any Remote control commands are recieved OK and any front panel button presses are OK. The standby light goes off for about 2 seconds and comes back on again. I can hear the switching clicks.
I have checked for obvious problems, Re-soldered Q801 and IC451.
As my experience with TV servicing is limited, I was wondering if anyone can point me to known fixes for this problem.
Thanks
|
|
| Back to top |
|
 |
SteveTearall
Joined: 21 Apr 2008
Posts: 5
|
22 Apr 2008 9:35 Re: Help needed with TV repair |
|
|
|
|
| Has nobody got any sugestions?
|
|
| Back to top |
|
|
Spookz
Joined: 22 Apr 2008
Posts: 5
|
22 Apr 2008 11:40 Re: Help needed with TV repair |
|
|
|
|
Hi Steve,
Our one did this also & after checking for dry solder joints etc > put it to one sid for a few days & when I went to work on it...it was working. Seems the room I was working on it in had a dehumidifier & in may have had some condesation in the LOPT (flyback transformer). Try sticking it in a dry place for a few days & see how it goes.
|
|
| Back to top |
|
|
Google
AdSense
|
22 Apr 2008 11:40 Ads |
|
|
|
|
|
|
| Back to top |
|
|
SteveTearall
Joined: 21 Apr 2008
Posts: 5
|
22 Apr 2008 13:01 Re: Help needed with TV repair |
|
|
|
|
I will certainly give that a try. Leaving it alone for a while seems like a good idea at the moment anyway.
Cheers
Steve
|
|
| Back to top |
|
|
