electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

How to do corner-type analysis without corner analysis tool
Post new topic  Reply to topic    EDAboard.com Forum Index -> Analog IC Design & Layout -> How to do corner-type analysis without corner analysis tool
Author Message
tia_design



Joined: 22 Feb 2005
Posts: 122
Helped: 3
Post04 Mar 2008 7:36   

How to do corner-type analysis without corner analysis tool
We don't have corner analysis tool. How to do worse case simulations to cover those corner? If directly select the models, MOSFET has ss sf fs ff typcial models, bipolar has min, typ and max models same for resistor and capacitor. There will be 5 x 3 x 3 = 45 types of combination. It is definitely undoable.
Back to top
safwatonline



Joined: 19 Nov 2005
Posts: 1418
Helped: 172
Location: EGYPT
Post04 Mar 2008 9:51   

How to do corner-type analysis without corner analysis tool
ocean
Back to top
siddharthshukla



Joined: 13 Sep 2006
Posts: 22
Helped: 2
Post04 Mar 2008 11:34   

Re: How to do corner-type analysis without corner analysis t
try to choose those combinations which are going to be the worst or best accordingly.it depends on the circuit,u need to analyze that.
Back to top
Google
AdSense
Google Adsense
Post04 Mar 2008 11:34   

Ads


Back to top
wateror



Joined: 26 Aug 2007
Posts: 81
Post05 Mar 2008 3:14   

How to do corner-type analysis without corner analysis tool
hspice can do that..
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> Analog IC Design & Layout -> How to do corner-type analysis without corner analysis tool
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
Analog Corner Analysis: component has no corner (1)
how to do monte carlo analysis from corner analysis (4)
How to do a corner analysis over parameter analysis? (3)
parametric analysis nested with corner analysis in cadence? (2)
how to run corner analysis in tsmc 0.35 design kit (1)
Corner analysis in Cadence (11)
corner analysis of Vth (12)
Corner analysis tutorial (6)
Corner analysis error? (2)
spectre - corner analysis (2)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS