electronics forum

Rules | Recent posts | topic RSS | Search | Register  | Log in

writing data to DDR SDRAM card.
Post new topic  Reply to topic    EDAboard.com Forum Index -> PLD, SPLD, GAL, CPLD, FPGA Design -> writing data to DDR SDRAM card.
Author Message
suddy72



Joined: 28 Jun 2007
Posts: 50
Post06 Sep 2007 16:25   

xup2vp
hi,

I have posted a similar question on here before and got no where.
I am having problems with writing data to a DDR SDRAM card which sits in a 184-pin Dual In-line Memory Module (DIMM) socket on board an XUP Virtex II pro Evaluation board.

I have set the board up so that it reads data on switches and displays the output on LEDS -- SIMPLE. I now want to sample this outputed data ( can use the system clock for now) and store the results in memory. (ie) for 64000 sample. My plan is then to send this data to the PC. But i want to do one step at a time first.

Can anyone guide me through step by step just how i can write this data onto the DDR SDRAM.

Thanks again for all your help.

Stuart Sutherland
Back to top
Google
AdSense
Google Adsense
Post06 Sep 2007 16:25   

Ads


Back to top
kishore2k4



Joined: 17 Jun 2006
Posts: 293
Helped: 33
Post07 Sep 2007 6:53   

Re: writing data to DDR SDRAM card.
Since you didn't mention anything about a DDR-SDRAM controller, I am assuming you didn't use one. You'll be needing a dram controller to interface with the external DRAM module. XUP2VP comes with a some VGA examples, you can check them for basic understanding.
Back to top
Arabic versionBulgarian versionCatalan versionCzech versionDanish versionGerman versionGreek versionEnglish versionSpanish versionFinnish versionFrench versionHindi versionCroatian versionIndonesian versionItalian versionHebrew versionJapanese versionKorean versionLithuanian versionLatvian versionDutch versionNorwegian versionPolish versionPortuguese versionRomanian versionRussian versionSlovak versionSlovenian versionSerbian versionSwedish versionTagalog versionUkrainian versionVietnamese versionChinese version
Post new topic  Reply to topic    EDAboard.com Forum Index -> PLD, SPLD, GAL, CPLD, FPGA Design -> writing data to DDR SDRAM card.
Page 1 of 1 All times are GMT + 1 Hour
Similar topics:
Writing data to on board DDR SDRAM on Virtex II Eval board. (4)
Display DDR SDRAM data on LEDs (XUPV2P) (6)
what is the need of Data Mask in DDR SDRAM (2)
ddr sdram (8)
DDR SDRAM (3)
DDR SDRAM samples... (8)
DDR SDRAM CONTROLLER (5)
DDR SDRAM of Spartan 3E (5)
Load to DDR SDRAM (2)
DDR SDRAM simulation (6)


Abuse || Administrator || Moderators || Support us || sitemap
topic RSS