Rules | Recent posts | topic RSS | Search | Register  | Log in

Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manual

 
Post new topic  Reply to topic    EDAboard.com Forum Index -> Service Manuals, Requests, Repair Tips
Author Message
pit



Joined: 05 Jun 2002
Posts: 219
Helped: 6


Post27 May 2007 11:56   Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manual




Sorry, but you need login in to view this attachment

Back to top
Meridian



Joined: 19 Apr 2007
Posts: 319
Helped: 17
Location: Ontario, Canada


Post29 May 2007 17:41   Re: Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manu

pit wrote:


http://search.ebay.com/anritsu
Back to top
pit



Joined: 05 Jun 2002
Posts: 219
Helped: 6


Post29 May 2007 18:28   Re: Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manu

Yes? What do you want to express with your comment?
Back to top
hamwork



Joined: 25 May 2008
Posts: 2


Post06 Jun 2008 7:05   Re: Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manu

pit wrote:


Thanks for manual,
do you now where i can find the service manual to ??
kind regards
Back to top
pit



Joined: 05 Jun 2002
Posts: 219
Helped: 6


Post06 Jun 2008 14:03   Re: Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manu

hamwork wrote:
pit wrote:

Thanks for manual,
do you now where i can find the service manual to ??


Here!

Service manual for Anritsu MS2601A (50 Ohm) and MS2601J (75 Ohm)

CU



Sorry, but you need login in to view this attachment

Back to top
SJUNS



Joined: 21 Aug 2008
Posts: 3


Post21 Aug 2008 13:13   Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manual

Thanks for manual
Back to top
janne



Joined: 09 Sep 2003
Posts: 18
Location: Sweden


Post03 Oct 2008 19:20   Re: Anritsu MS2601A MS2601J Spectrum Analyzer Operation Manu

Hi and thanx for the SM!

Have a MS2601A spec that dosen't work.. Have download the service manual and start to fault finding but I will trye to se if i can get some advice what i could be the "topic". If i connect the 50MHz output on the back to the input and set Fq to 50MHz and span to 200MHz i will get a normal "top" that is not locked, its flying around and if decreace the span (100KHz) the top will disappear.. One more thing is if i set Fq 0MHz, Span 0MHz and no input i will get a noice floor with sudden rise (like a mesuring a "1" TTL level with a oscilloscope) and back to the noice floor..

Both PLL LEDs Q44 and Q10 are off = locking, page 3-51.



Sorry, but you need login in to view this attachment

Back to top
Post new topic  Reply to topic    EDAboard.com Forum Index -> Service Manuals, Requests, Repair Tips
Page 1 of 1 All times are GMT + 2 Hours


Abuse
Administrator
Moderators
topic RSS 
sitemap