Rules | Recent posts | topic RSS | Search | Register  | Log in

J1939 test environment

 
Post new topic  Reply to topic    EDAboard.com Forum Index -> Professional Hardware and Electronics Design
Author Message
pisoiu



Joined: 31 Dec 2002
Posts: 900
Helped: 24
Location: Romania
Post27 Dec 2006 19:59   J1939 test environment
Hi,
I have to design various interfaces for automotive environment, to be connected to trucks working with SAE J1939 based busses. For testing purposes I will need a sw+hw tool for testing and simulating a real J1939 network. This tool is required to generate messages and interact with my interfaces in order to test them, as they were installed on real J1939 interfaces in trucks. Can anyone share any experience with such tools, where to purchase them, etc.?
Thanks,

/pisoiu
Back to top
funnynypd



Joined: 09 May 2007
Posts: 641
Helped: 15
Location: USA
Post06 Apr 2008 3:03   Re: J1939 test environment
Here is some useful link:
SAE J1939 simulator:
http://www.auelectronics.selfip.com/System-J1939Simulator.htm

SAE J1939 Data Center:
http://www.auelectronics.selfip.com/System-DCSJ1939-001.htm

SAE J1939 Message Center:
http://www.auelectronics.selfip.com/System-MCSJ1939-001.htm

Simulator:


Network topology:


PC remote software:
Back to top
funnynypd



Joined: 09 May 2007
Posts: 641
Helped: 15
Location: USA
Post01 Jul 2008 0:28   Re: J1939 test environment
Now there is CAN evaluation network available from Au Group Electronics:

http://www.auelectronics.com/UserManual-dsPIC30F-CAN-Bootloader_Eval_Kit.htm





For customer test purpose, the network can be tunned to different speed. The J1939 runs at 250K, some Automotive CAN network runs at 500K.

The demo document gives a CAN network with 500K bps.
Back to top
Post new topic  Reply to topic    EDAboard.com Forum Index -> Professional Hardware and Electronics Design
Page 1 of 1 All times are GMT + 2 Hours


Abuse
Administrator
Moderators
topic RSS 
sitemap