| Author |
Message |
behranghm
Joined: 12 Feb 2006
Posts: 36
|
 18 Aug 2006 21:45 3.3v cstn 128x128 photo |
|
|
|
|
i don't know where to put this question. you quide me plz.
i have been working with the monochrome Lcd of 3310 for quite a while now. it's easy to work with, it's handy, most important of all, it's very small and very cheap and it operates on voltages lower than 3 volts and it's very easy to interface with a microcontroller.
the question is:
and color LCd with this charectersitics?
thanks.
|
|
| Back to top |
|
 |
TechToys
Joined: 16 May 2006
Posts: 151
Helped: 17
|
19 Aug 2006 3:32 s6b33bc lcd |
|
|
|
|
| Quote: |
| and color LCD with this charectersitics? |
Have an 1.8" 65k LCD with Samsung S6B33BC controller:
CSTN Display mode
Voltage: 3.0-3.3V, w/ built-in LCD voltage generator
White LED backlight
8-bit parallel mode
1/162 duty, 1/5 bias
LCD module size: 33.54(W) x 45(H) x 1.65(T)
Viewing area: 30.54(w) x 36.04(h)
effective display area: 27.252(w) x 34.068(h)
matrix: 128*RGB*160
dot size: 0.201(BGR)(W) x 0.201(h)
Display driver in C18 released. Available with bare unit or with PCB board, LCD backlight driver circuit. Development board with 18LF4550 with USB Mass Storage available.
John Leung
www.TechToys.com.hk
Last edited by TechToys on 20 Sep 2006 15:38; edited 2 times in total |
|
| Back to top |
|
|
ramesh
Joined: 19 Jan 2003
Posts: 1260
Helped: 5
|
19 Aug 2006 4:11 Re: color Lcd |
|
|
|
|
| The Acrobat reader requires Korean fonts to open the above pdf file.
|
|
| Back to top |
|
|
Google
AdSense
|
19 Aug 2006 4:11 Ads |
|
|
|
|
|
|
| Back to top |
|
|
TechToys
Joined: 16 May 2006
Posts: 151
Helped: 17
|
19 Aug 2006 17:13 Re: color Lcd |
|
|
|
|
Just follow acrobat download for Korean fonts will be alright. However, 99% of the application note in English, actually.
John
|
|
| Back to top |
|
|
giaosucan
Joined: 16 Aug 2006
Posts: 9
|
20 Aug 2006 3:22 color Lcd |
|
|
|
|
Color LCD is usually used in cell phone
as I know , manufactures offent use mirocontroller
may be
I don't have much experence of using color LCD
can any one help me ??
thanks for your advice
|
|
| Back to top |
|
|
hugo
Joined: 01 Jan 1970
Posts: 286
Helped: 27
Location: canada
|
21 Aug 2006 5:00 Re: color Lcd |
|
|
|
|
| behranghm wrote: |
i don't know where to put this question. you quide me plz.
i have been working with the monochrome Lcd of 3310 for quite a while now. it's easy to work with, it's handy, most important of all, it's very small and very cheap and it operates on voltages lower than 3 volts and it's very easy to interface with a microcontroller.
the question is:
and color LCd with this charectersitics?
thanks. |
Check this out:
Color LCD 128x128 Nokia Knock-Off
http://www.sparkfun.com/commerce/product_info.php?products_id=569
Price: $19.95
|
|
| Back to top |
|
|
Buriedcode
Joined: 06 May 2004
Posts: 327
Helped: 34
Location: London
|
22 Aug 2006 4:58 Re: color Lcd |
|
|
|
|
I can vouch for the above LCD.
I bought the LCD off ebay (not sparkfun) but after emailing them I was told that it is exactly the same LCD, with the same controller chip.
Also, sparkfun do 'carrier' boards, very handy, just plug in your LCD and you have all the pins you need available on a 0.1" standard pitch header. I'm not advertising here, but its a great and cheap way to get a small colour TFT into a project. In fact, I'm just about to order some more. Its TFT 128x128, which, when setup for full colour (65k?) looks incredible.
However, you mentioned a '3310 lcd', the closest colour equiv of that would be the LCD from a 3510i. Apparently it can display photo's, but its resolution is not quite as good as the one from sparkfun, however, this is easily interfaced with SPI (like most nokia lcds). The 3510i lcd requires an external backlight, whereas the one form sparkfun has it built it (and the carrier board steps up the voltage for it). However, making a backlight wouldn't be hard, if you buy the LCD from ebay, it'll come with the fascia for the hpone, which has the lightguide for the backlight attached. A few SMT white LED's would do nicely (again, done it myself).
It seems in the past year of so, the price of 1-2" colour LCD's has dropped, so get em now 
BuriedCode.
|
|
| Back to top |
|
|
dani
Joined: 08 Mar 2004
Posts: 179
Helped: 1
Location: UK
|
07 Sep 2006 12:54 Re: color Lcd |
|
|
|
|
HI all,
I also don't know where to put this question. you quide me plz.
i want to work with color graphic lcd but these mobile lcds are very small. My questions is is there any Large lcd any size from 5" to 12" which can be easily interface with microcontrollers for graphic displays.
thanks.
|
|
| Back to top |
|
|
