How to locate floating net / cell in the netlist?

Rules | Recent posts | topic RSS | Search | Register | Log in

How to locate floating net / cell in the netlist?

EDAboard.com Forum Index -> ASIC Design Methodologies & Tools (Digital)

Author

Message

omid219

Joined: 02 Feb 2005
Posts: 120
Helped: 4
Location: Malaysia

27 Jun 2006 18:13 How to locate floating net / cell in the netlist?

Hi All,

I have a question here. I appreciate if anyone can help.

How can I locate the floating net / cell in the pre/post place and route netlist?
I'm giving considerable amount of leakage current and I think one reason can be the floating nets. I'm using PKS from cadence for synthesis and SOC Encounter for p&r.

Regards

omid219

Joined: 02 Feb 2005
Posts: 120
Helped: 4
Location: Malaysia

28 Jun 2006 6:45 Re: How to locate floating net / cell in the netlist?

Hi,

I found the answer myself. so let me put it here that everyone can use. There is a command in PKS called check_nestlist. This will gives you a report on all floating net / ports , multiple driving nets and combinational loop. You can use this command so.

Regards

EDAboard.com Forum Index -> ASIC Design Methodologies & Tools (Digital)

Page 1 of 1

All times are GMT + 1 Hour

Abuse
Administrator
Moderators

sitemap