EasyPIC 3 Dev Board Schematic

EDAboard.com Forum Index -> Microcontrollers -> EasyPIC 3 Dev Board Schematic

Author

Message

skhimsara

Joined: 20 Aug 2005
Posts: 1

20 Aug 2005 16:04 easypic3 schematic

Hi

can anyome please give me the Easy PIC 3 schematic.
I need it for my project in PIC .
i am an elec engg student doing my final year project

thanks in advance

hassan1980

Joined: 14 Jan 2005
Posts: 208
Helped: 3

19 Jun 2007 21:11 easypic3

Hi, Dearfriend

By the way, I am electronics eng then I want the Schematic for EasyPic 3 or 4 if you have it please let me know

Kind Regards

Hassan

babatundeawe

Joined: 12 Apr 2007
Posts: 104
Helped: 2
Location: NIgeria

19 Jun 2007 22:57 easypic 6

i think trying to make a hardwar such as easy pic3 will be more expensive than getting the board itself. i might be wrong but i am sure making easy PIC3 is not your project. if u need to use a devlopment board try and get one, and you will get some additional package with it alongside. but if you need a do it yourself try the oshonsoft develoment board and other ones you can get online.

blueroomelectronics

Joined: 17 Sep 2006
Posts: 1681
Helped: 99
Location: Toronto, Canada

19 Jun 2007 23:54 easypic 5 schematic

The easyPIC boards would be a nightmare to hand wire. And I'm sure they don't publish the layout artwork.

vsmGuy

Joined: 26 Jun 2006
Posts: 489
Helped: 28

20 Jun 2007 2:19 pic board schematic

Schematics are easy to design. It's the layouts which take skill.

No one will ever give out his layout for a commercial board.

wizpic

Joined: 23 May 2004
Posts: 380
Helped: 26

20 Jun 2007 3:54 easypic4 schematic

I have got the easypic 3 and 4 schematics some where but to be honest just buy one well worth the money, I tried to make one but gave up

the on-board programmer/debugger can't be copied anyway so what's the point without those you may aswell design a simple one jut to a 40pin board and then adpators to plug into the 40pin board so simple

wizpic

Jonathan_T

Joined: 28 Mar 2007
Posts: 31
Helped: 1

20 Jun 2007 16:56 easypic 3

i had have saw it in this site.
could you see schematics in this directory
http://www.embedded-hardware.com/category/pic

blueroomelectronics

Joined: 17 Sep 2006
Posts: 1681
Helped: 99
Location: Toronto, Canada

21 Jun 2007 5:57 easypic schematic

wizpic wrote:

My MPLAB ICD2 clone can be built, and the Firefly & Unicorn kits too. I publish the schematics and .hex files required for my kits.

You can even do USB with the Unicorns 18F4550 (GLCD & LCD too)
The picture below was done by a Unicorn user.
EasyPIC 3 Dev Board Schematic

wizpic

Joined: 23 May 2004
Posts: 380
Helped: 26

21 Jun 2007 20:14 pic board schema

Bueroomelectronics i was talking about the easypic 4 board which has it's own built in programmer/Debugger and that bit cannot be copied,

Yeah your kits look good and simple to build

wizpic

fmssp.ere

Joined: 09 Apr 2006
Posts: 32
Helped: 4
Location: Moscow, Russia

23 Jun 2007 7:39 easypic 4 schematic

In attachment: easyPIC3 Dev Board Schematic & Manual

Sorry, but you need login in to view this attachment

pbon21

Joined: 23 Oct 2007
Posts: 1

23 Oct 2007 19:05 easypic 6 development board

have anywone make a clone ?

sorry for my bad english

zenega

Joined: 04 Nov 2007
Posts: 1

04 Nov 2007 9:17 easypic, 18f4550

I have a damaged Easypic3.The problem is that it recognises all mcu's as 12f508. The board gets detected by computer and usb connection is established. Any help

blueroomelectronics

Joined: 17 Sep 2006
Posts: 1681
Helped: 99
Location: Toronto, Canada

04 Nov 2007 15:07 easy pic 3 schematics

The 12F508 does not have an on chip ID nor does any 12bit core PIC. Sounds like it sees nothing at all.
What are the IC part numbers on the EasyPIC3 programmer section?

Google
AdSense
Google Adsense

04 Nov 2007 15:07 Ads

xorcise

Joined: 27 Sep 2007
Posts: 125
Helped: 19
Location: NYC

04 Nov 2007 18:26 easypic 3 schematic

If you can still get USB connection your programmer controller is okay. You have probably damaged the 4053 Analog Switch on the board. Replace it.

Another user did the same thing and created a new feature in the process:

http://www.micro-examples.com/public/microex-navig/doc/900-prog-led.html

asneeze

Joined: 14 Nov 2007
Posts: 2

18 Nov 2007 18:44 easy pic usb programmer built

this looks nice gonna try to toner transfer it and see if i can play with it some. This is a great board, I am new but it seems GREAT!!!!

altipatlar006

Joined: 24 Jan 2008
Posts: 6

28 Feb 2008 14:47 easypic3 circuit

easyPIC 4 has been established,does anyone get it?

blueroomelectronics

Joined: 17 Sep 2006
Posts: 1681
Helped: 99
Location: Toronto, Canada

29 Feb 2008 2:06 schematic diagram of easy pic 5

altipatlar006 wrote:

easyPIC 4 has been established,does anyone get it?

Get what? I'd rather use my own kits. Smile

Jose Fausto

Joined: 27 Jun 2005
Posts: 77
Helped: 1
Location: Peru

03 Mar 2008 1:03 easypic 6 manual

HI FRIENDS
IS SOMEBODY INTERESTING IN A SIMILAR DEVELOPMENT BOARD LIKE EASYPIC4.
DIFERENCE IS WHAT IT WORKS WITH MPLAB OR PICKIT2, THE PROGRAMMER IS COMPATIBLE WITH PICKIT2
WE MADE ONE, AND WE ARE GOING TO PRODUCE FOR SELL. YOU CAN SEE A PICTURE IN THE NEXT LINK
http://www.edaboard.com/viewtopic.php?t=279241&postdays=0&postorder=asc&highlight=easypic&start=30

dgs117

Joined: 12 Sep 2007
Posts: 9
Location: Lithuania

10 Jun 2008 11:01 easypic compatible programmer

I made my own dev board for PIC18F4520. It's more or less like EasyPIC4. There is an on-board MPLAB 7.60a compatible ICD2 (upper right corner). Yesterday I demonstrated this board as my final work for bachelor's degree. It works but still needs a lot of improvements. The board features a lot of perphereals, like I2C (for eeprom), SPI (for MAX7219), OneWire (for DS1820), RS232 (MAX232), analog input (two potentiometers), socket for resonator, piezo buzzer, two connectors for LCD 2x16 and GLCD 128x64, pull-up/down resistors, push buttons, LED's, each port has a connector for external devices. Each device can be connected/disconnected with a dip switch or a jumper (like in EasyPIC's).

I could publish the schematics and all but I wont, coz the design is not perfect yet. It will be (I hope) after summer Smile